Elec Maroilles
pollen-robotics·elec_Maroilles
About the Elec Maroilles PCB
Elec Maroilles is an open source PCB design by pollen-robotics, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 150 × 25 mm, with 75 components from 30 distinct parts.
Other key parts include the FE1.1s_24-Pin_WQFN, 24C02S, CH343P, SN74LVC1G125DBV and SN74LVC1G126DBVR. By type, the board carries 25 resistors, 15 diodes, 13 capacitors, 11 connectors, 7 ICs and 2 transistors.
From the project
USB 2.0 hub with lockable connectors for R2
"elec_maroilles" is USB 2.0 hub built with lockable USB connectors. It provides also Dynamixel TTL and Dynamixel RS485 converters and the associated connectors for Reachy 2's grippers and antennas.

Main components on the Elec Maroilles
Elec Maroilles bill of materials (BOM)
75 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FE1.1s_24-Pin_WQFN | WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | 24C02S | SOT-23-5 | U2 |
| 2 | CH343P | WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U3, U6 |
| 1 | SN74LVC1G125DBV | SOT-23-5 | U4 |
| 1 | SN74LVC1G126DBVR | SOT-23-5 | U5 |
| 1 | SIT3088E | DFN-8-1EP_3x3mm_P0.65mm_EP1.5x2.25mm | U7 |
| 2 | MMBT3906 | SOT-23 | Q1, Q2 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_A vert. | Amphenol_LUSBA11100 | J1 |
| 3 | Pico5 | Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical | J3, J6, J7 |
| 2 | DNP - Dynamixel-3 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4, J5 |
| 2 | DNP - Dynamixel-4 | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8, J9 |
| 3 | PicoBlade 5 | Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical | J10, J11, J12 |
| 1 | 100R thermistor | R_0603_1608Metric | TH1 |
| 3 | SP0503BAHT | SOT-143 | D1, D10, D12 |
| 5 | LED_Small | LED_0603_1608Metric | D2, D4, D5, D6, D7 |
| 1 | 5V1 | D_SOD-323 | D8 |
| 4 | DNP - B5819WS | D_SOD-323 | D9, D11, D13, D14 |
| 2 | B5819WS | D_SOD-323 | D15, D16 |
| 1 | 10u | C_0603_1608Metric | C1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 100n | C_0603_1608Metric | C2, C4, C6, C7, C8, C10, C12, C13 |
| 4 | 1uF-6V3 | C_0603_1608Metric | C3, C5, C9, C11 |
| 9 | 10k | R_0402_1005Metric | R1, R8, R10, R11, R13, R14, R16, R17 +1 |
| 3 | 0R | R_0402_1005Metric | R2, R19, R25 |
| 1 | 2k7 | R_0402_1005Metric | R3 |
| 3 | 330R | R_0402_1005Metric | R4, R5, R9 |
| 2 | 5k1 | R_0402_1005Metric | R6, R7 |
| 2 | 20k | R_0402_1005Metric | R12, R18 |
| 1 | 150R | R_0402_1005Metric | R15 |
| 4 | DNP - 0R | R_0402_1005Metric | R21, R22, R23, R24 |
Elec Maroilles design files
The KiCad project lives in the pollen-robotics/elec_Maroilles repository on GitHub; these links point at the commit this page was built from.
- Layoutelec_maroilles.kicad_pcb
- Schematicelec_maroilles.kicad_sch
Elec Maroilles: common questions
How big is the Elec Maroilles PCB?
The Elec Maroilles measures 150 × 25 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Elec Maroilles?
75 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Elec Maroilles design files?
From the pollen-robotics/elec_Maroilles repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Elec Maroilles design in my own project?
Yes, under the terms of its Apache-2.0 license, which pollen-robotics chose for the repository.