2 open source boards using the FE1.1s_24-Pin_WQFN

Real designs built with the FE1.1s_24-Pin_WQFN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The FE1.1s_24-Pin_WQFN in open source designs

The gallery holds 2 open source boards using the FE1.1s_24-Pin_WQFN from 2 GitHub repositories; a typical one measures about 107.5 × 27.5 mm and carries around 94 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Grippette - USB hub and Dynamixel device by pollen-robotics.

Parts used alongside the FE1.1s_24-Pin_WQFN

What boards using the FE1.1s_24-Pin_WQFN are built for

FE1.1s_24-Pin_WQFN: common questions

Where can I find a FE1.1s_24-Pin_WQFN reference design?

Each of the 2 boards on this page is a real design using the FE1.1s_24-Pin_WQFN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the FE1.1s_24-Pin_WQFN?

The 24C02S, CH343P, SN74LVC1G125DBV and SN74LVC1G126DBVR appear in the most repositories here.

How big is a typical board using the FE1.1s_24-Pin_WQFN?

The median is 107.5 × 27.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the FE1.1s_24-Pin_WQFN?

By GitHub stars, Grippette - USB hub and Dynamixel device by pollen-robotics, with 10 stars.

Can I simulate one of these boards using the FE1.1s_24-Pin_WQFN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part