3 open source boards using the 24C02S
Real designs built with the 24C02S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Grippette - USB hub and Dynamixel device
pollen-robotics
65 × 30 mm113 parts4LApache-2.010ESP32
Wifi voltmeter
makerspacelt
40 × 65 mm48 parts2LCERN-OHL-S-2.02Elec Maroilles
pollen-robotics
150 × 25 mm75 parts4LApache-2.00
The 24C02S in open source designs
The gallery holds 3 open source boards using the 24C02S from 3 GitHub repositories; a typical one measures about 65 × 30 mm and carries around 75 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Grippette - USB hub and Dynamixel device by pollen-robotics.
Parts used alongside the 24C02S
Microcontrollers on boards using the 24C02S
What boards using the 24C02S are built for
24C02S: common questions
Where can I find a 24C02S reference design?
Each of the 3 boards on this page is a real design using the 24C02S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 24C02S?
The CH343P, FE1.1s_24-Pin_WQFN, SN74LVC1G125DBV and SN74LVC1G126DBVR appear in the most repositories here.
Which microcontrollers do boards using the 24C02S use?
Most are built on ESP32 (1).
How big is a typical board using the 24C02S?
The median is 65 × 30 mm, and 33% are two-layer designs.
What is the most popular open source board using the 24C02S?
By GitHub stars, Grippette - USB hub and Dynamixel device by pollen-robotics, with 10 stars.
Can I simulate one of these boards using the 24C02S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.