HardLabs

Kits

Poluino·Kits·Full Kit (V - 1.2)/KiCAD Files/WeatherStationPCB-V1.2.kicad_pcb

Kits PCB layout, top view — open source ESP32 board by Poluino
Simulate this board

About the Kits PCB

Kits is an open source ESP32 PCB design by Poluino, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 90.2 × 53.3 mm, with 15 components from 8 distinct parts.

Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 6 connectors, 5 resistors, 2 ICs and 2 transistors.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

List of our available Kits and files related to it.

[](https://www.tindie.com/stores/wspindia/?ref=offsitebadges&utmsource=sellersWSPIndia&utmmedium=badges&utmcampaign=badgelarge)

This repository includes all the files to print your own PCB, Source the components, and debug the circuit.

2. Full Kit: - Temperature, Humidity, Pressure, Air Quality, Luminosity, UV Index, and Rain. - Version 1.2 Includes the DHT11 for Humidity, BMP280 for Pressure and Temperature, MQ - 135 for Air Quality, BH1750 for Luminosity, GUVA - S12SD for UV Index, and YL - 83 for Rain. - Version 2.0 Will use BME280 for Humidity, Temperature, and Humidity, VEML 6070 for…

Main components on the Kits

ESP32-DEVKITC-32DDHT11

Kits bill of materials (BOM)

15 components, 8 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32D
U1
1
DHT11
U2
2
BS170
Q1, Q2
1
Barrel_Jack_Switch
J1
3
Conn_01x03_Female
J2, J3, J5
1
BMP280 Pressure Sensor
J4
1
BH1750 Lux Meter
J6
5
5K
R1, R2, R3, R4, R5

Kits design files

The KiCad project lives in the Poluino/Kits repository on GitHub; these links point at the commit this page was built from.

Kits: common questions

What microcontroller does the Kits use?

The Kits is built around the ESP32-DEVKITC-32D, from the ESP32 family.

How big is the Kits PCB?

The Kits measures 90.2 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kits?

15 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kits design files?

From the Poluino/Kits repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Kits design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which Poluino chose for the repository.

Can I test firmware for the Kits without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards