AI-Hardware-ESP32S3-

ponrajleo·AI-Hardware-ESP32S3-·Hardware/ZAP-01A/ZAP-01A.kicad_pcb

AI-Hardware-ESP32S3- PCB layout, top view — open source ESP32 board by ponrajleo

About the AI-Hardware-ESP32S3- PCB

AI-Hardware-ESP32S3- is an open source ESP32 PCB design by ponrajleo, published on GitHub. It is a 2-layer board measuring 105 × 58 mm, with 71 components from 35 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DS3231M, AMS1117-3.3 and USBLC6-2P6. By type, the board carries 26 resistors, 17 capacitors, 7 diodes, 6 switches, 4 ICs and 3 connectors.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

This project is part of a complete open-source hardware design course on YouTube:

This project is part of a complete open-source hardware design course on YouTube:

▶️ Hardware Design With AI Co-Pilot-Full Playlist

The course covers the complete design journey-from schematic to PCB layout, firmware, and cloud integration.

- Overview - Features - Hardware Specifications - System Architecture - Operating Modes - Repository Structure - Getting Started - Firmware Setup - Cloud & Voice Assistant Integration - Manufacturing - Contributing - License

AI-Hardware-ESP32S3-, from the project README
From the project README

Main components on the AI-Hardware-ESP32S3-

AI-Hardware-ESP32S3- bill of materials (BOM)

71 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
DS3231M
U2
1
AMS1117-3.3
U3
1
USBLC6-2P6
U4
2
AO3400A
Q1, Q2
1
Conn_01x04_Socket
J1
1
Screw_Terminal_01x04
J2
1
USB_C_Receptacle_USB2.0_16P
J3
1
CH291-1220LF
BT1
1
500mA 250V
F1
1
Relay_SPDT
K1
1
MLT-8530
LS1
1
HLK-5M05
PS1
1
10D561K
RV1
5
SW_Push
SW1, SW3, SW4, SW5, SW6
1
SW_Push
SW2
1
RED
D1
1
B5819W
D2
2
1N4148W
D3, D4
1
GREEN
D5
Show 15 more
QtyPartRefs
1
YELLOW
D6
1
RED
D7
4
10uF
C1, C12, C13, C16
8
100nF
C2, C3, C4, C5, C6, C7, C15, C17
3
100nF/50V
C8, C11, C14
1
0.1uF
C9
1
220uF
C10
4
0R
R1, R2, R3, R4
5
10K
R5, R14, R15, R16, R17
5
4K7
R6, R7, R9, R10, R11
1
1M
R8
2
5K1
R12, R13
2
0E
R18, R19
1
470R
R20
6
1K
R21, R22, R23, R24, R25, R26

AI-Hardware-ESP32S3- design files

The KiCad project lives in the ponrajleo/AI-Hardware-ESP32S3- repository on GitHub; these links point at the commit this page was built from.

AI-Hardware-ESP32S3-: common questions

What microcontroller does the AI-Hardware-ESP32S3- use?

The AI-Hardware-ESP32S3- is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the AI-Hardware-ESP32S3- PCB?

The AI-Hardware-ESP32S3- measures 105 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AI-Hardware-ESP32S3-?

71 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AI-Hardware-ESP32S3- design files?

From the ponrajleo/AI-Hardware-ESP32S3- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AI-Hardware-ESP32S3- design in my own project?

The repository has no license, so all rights stay with ponrajleo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AI-Hardware-ESP32S3- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards