Pseudo-Vinyl-MP3-Player
PotatoPeaSea·Pseudo-Vinyl-MP3-Player·MP3PlayerPCB/MP3PlayerPCB.kicad_sch

About the Pseudo-Vinyl-MP3-Player PCB
Pseudo-Vinyl-MP3-Player is an open source ESP32 PCB design by PotatoPeaSea, published on GitHub. It is a board, with 14 components from 12 distinct parts.
Its main chip is the ESP32-CAM, from the ESP32 family. Other key parts include the TP4056-42-ESOP8. By type, the board carries 3 switches, 3 resistors, 2 ICs, 2 connectors, 2 diodes and 2 capacitors.
It belongs with the audio, iot & wireless and displays & leds designs in this gallery.
From the project
A portable ESP32 MP3 player with Bluetooth audio and vinyl-style spinning album art on a circular display
A portable, battery-powered MP3 player built on the ESP32-WROOM-32 that streams audio wirelessly to Bluetooth earbuds and features a vinyl-style spinning album art animation on a circular display.
- Bluetooth Audio — Streams to wireless earbuds/speakers via A2DP (primary output), with on-device scanning, pairing, and auto-reconnect - Wired Output — Secondary 3.5mm headphone jack via PCM5102 I2S DAC, switchable in Settings - Circular Display — 1.28" GC9A01 240×240 IPS round screen - Vinyl Spin Animation — Album art spins like a vinyl record during playback, with a progress ring around the…
Main components on the Pseudo-Vinyl-MP3-Player
Pseudo-Vinyl-MP3-Player bill of materials (BOM)
14 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-CAM | ESP32-CAM | U1 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U3 |
| 1 | GC9A01 | GC9A01 TFT | J1 |
| 1 | Conn_01x02_Socket | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J3 |
| 1 | Next | SW_PUSH_6mm | SW1 |
| 1 | Prev | SW_PUSH_6mm | SW2 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 1 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | GREEN | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 3Ohms | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
Pseudo-Vinyl-MP3-Player design files
The KiCad project lives in the PotatoPeaSea/Pseudo-Vinyl-MP3-Player repository on GitHub; these links point at the commit this page was built from.
- SchematicMP3PlayerPCB/MP3PlayerPCB.kicad_sch
Pseudo-Vinyl-MP3-Player: common questions
What microcontroller does the Pseudo-Vinyl-MP3-Player use?
The Pseudo-Vinyl-MP3-Player is built around the ESP32-CAM, from the ESP32 family.
How many components are on the Pseudo-Vinyl-MP3-Player?
14 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pseudo-Vinyl-MP3-Player design files?
From the PotatoPeaSea/Pseudo-Vinyl-MP3-Player repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Pseudo-Vinyl-MP3-Player design in my own project?
The repository has no license, so all rights stay with PotatoPeaSea. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pseudo-Vinyl-MP3-Player without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k