BIGRIG OUTPUT
powsplatboom·Synth-DIY·Completed/Line Level Converter_Headphone Pre-Amp/BIGRIG_OUTPUT.kicad_pcb
About the BIGRIG OUTPUT PCB
BIGRIG OUTPUT is an open source PCB design by powsplatboom, published on GitHub. It is a 2-layer board measuring 30 × 70 mm, with 25 components from 23 distinct parts.
Other key parts include the OPA1688ID and TL074. By type, the board carries 8 capacitors, 8 resistors, 5 connectors, 2 ICs and 2 inductors.
It belongs with the audio designs in this gallery.
From the project
Where I will be collecting documentation for all my synth parts
Eurorack to line level output converter that I use in my DIY modular.
Main components on the BIGRIG OUTPUT
BIGRIG OUTPUT bill of materials (BOM)
25 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA1688ID | SOIC-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | TL074 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | PJ301_THONKICONN Right | PJ-3001_Mono_Phone | J2 |
| 1 | PJ301_THONKICONN Left | PJ-3001_Mono_Phone | J3 |
| 1 | PJ301_THONKICONN AudioJack2_Ground_Switch | Stereo_phon_jack_STX-3790 | J4 |
| 1 | PJ301_THONKICONN Mono | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 2 | Ferrite_Bead_Small | L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | FB2, FB3 |
| 1 | 10U 10uf | CP_Radial_D5.0mm_P2.50mm | C2 |
| 2 | 10U 0.1uf | C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C4 |
| 1 | 100N 10uf | CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 0.33U 47pf | C_Disc_D4.7mm_W2.5mm_P5.00mm | C8 |
| 1 | 0.33U 100nf | C_Disc_D4.7mm_W2.5mm_P5.00mm | C9 |
| 1 | 100N 100nf | C_Disc_D4.7mm_W2.5mm_P5.00mm | C12 |
| 1 | 100N 47pf | C_Disc_D4.7mm_W2.5mm_P5.00mm | C13 |
| 1 | 100K 6.8k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 680r | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11 |
| 1 | 20K 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 20K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 20K 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14 |
| 1 | 100K 680r | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R15 |
| 1 | 100 6.8k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R16 |
BIGRIG OUTPUT design files
The KiCad project lives in the powsplatboom/Synth-DIY repository on GitHub; these links point at the commit this page was built from.
BIGRIG OUTPUT: common questions
How big is the BIGRIG OUTPUT PCB?
The BIGRIG OUTPUT measures 30 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BIGRIG OUTPUT?
25 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BIGRIG OUTPUT design files?
From the powsplatboom/Synth-DIY repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BIGRIG OUTPUT design in my own project?
The repository has no license, so all rights stay with powsplatboom. Use it as a reference, and ask the author before reusing the design.
More boards in Synth-DIY
Panning Mixer
powsplatboom
243.8 × 100 mm633 parts4LNo license11Spring Reverb
powsplatboom
170 × 100 mm313 parts4LNo license11Utility board
powsplatboom
399.8 × 72 mm242 parts2LNo license11AVR/Arduino
SSI2130 Oscillator
powsplatboom
84 × 100 mm185 parts4LNo license11Stereo Mixer
powsplatboom
120 × 100 mm121 parts2LNo license11Feed Forward Compressor
powsplatboom
49.5 × 95 mm49 parts2LNo license11Feed Forward Compressor 14HP
powsplatboom
71.1 × 95 mm45 parts2LNo license11OutputBoard
powsplatboom
40 × 70 mm35 parts2LNo license11Layout
powsplatboom
139.7 × 78.7 mm19 parts2LNo license11Distribution Board
powsplatboom
200 × 35 mm15 parts2LNo license11
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687