Panning Mixer

powsplatboom·Synth-DIY·In Process/CV_Panning_Mixer/Panning Mixer.kicad_pcb

Panning Mixer PCB layout, top view — open source board by powsplatboom

About the Panning Mixer PCB

Panning Mixer is an open source PCB design by powsplatboom, published on GitHub. It is a 4-layer board measuring 243.8 × 100 mm, with 633 components from 90 distinct parts.

Other key parts include the TL074, LM4040A, L78L05_SOT89, L78L05_SO8 and L79L05_SO8. By type, the board carries 364 resistors, 106 capacitors, 50 diodes, 46 ICs and 39 connectors.

It belongs with the audio designs in this gallery.

From the project

Where I will be collecting documentation for all my synth parts

Replacement design for the stereo mixer I built previously. Works relatively well, but panning circuit need reworked to achieve constant power panning. Distortion gain needs adjusted to achieve more constant volume. Likely to switch to the SSI2164 with the redesign to save on cost and board size. The AS3360 is a finnicky chip that requires too many external components to function. Will also be adding expandability to the board so that a microphone pre-amp can be added as a separate upgrade. Would also like to add mute switches to all channels.

Main components on the Panning Mixer

Panning Mixer bill of materials (BOM)

633 components, 90 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TL074
U1, U2
1
TL074
TL072
U3
1
TL074
AudioMeter_left
U4
1
LM4040A
AudioMeter_right
U5
1
L78L05_SOT89
U6
1
L78L05_SO8
TL074
U7
1
L79L05_SO8
TL074
U8
1
LM311
AS3360
U9
23
TL074
U10, U13, U14, U16, U17, U19, U20, U22 +15
1
SSI2130
TL074
U11
11
AS3360
U12, U15, U18, U21, U24, U27, U30, U33 +3
2
TL072
U44, U46
1
CONN_02X08_ODD_EVEN
PJ301_THONKICONN1
J1
11
PJ301_THONKICONN
PJ301_THONKICONN1
J2, J3, J4, J5, J6, J7, J8, J9 +3
22
PJ301_THONKICONN1
J13, J14, J15, J16, J18, J19, J20, J21 +14
1
Conn_02x08_Odd_Even
J17
1
Conn_01x18_Male
J26
1
Conn_01x36_Male
J27
1
Conn_01x36_Female
J28
1
Conn_01x18_Female
J29
Show 70 more
QtyPartRefs
5
R_POT
RV1, RV2, RV3, RV10, RV12
4
B100K
R_POT
RV4, RV6, RV8, RV9
3
B10K
R_POT
RV5, RV7, RV11
16
R_POT_Dual
RV13, RV14, RV15, RV16, RV17, RV18, RV19, RV20 +8
1
B5819W
LED_RED
D1
2
B5819W
LED_YELLOW
D2, D3
7
1N4148W
LED
D4, D5, D6, D7, D8, D9, D10
1
1N4148W
LED_RED
D11
1
1N4148W
LED_YELLOW
D12
1
LED_YELLOW
D13
7
LED
D14, D15, D16, D17, D18, D19, D20
2
1N5819
D21, D22
24
BZX55C2V0
D23, D24, D25, D26, D27, D28, D29, D30 +16
4
1N4148
D47, D48, D49, D50
2
10U
10uf
C1, C2
2
10U
4n7
C3, C4
13
100N
100nf
C5, C6, C12, C13, C18, C19, C24, C25 +5
5
100P
100nf
C7, C10, C11, C20, C37
2
0.33U
100nf
C8, C9
1
0.1UF
100nf
C14
1
10U
100nf
C15
2
100N
100n
C16, C17
2
10N
4n7
C21, C22
1
10N
100nf
C23
64
100nf
C26, C30, C32, C33, C40, C41, C42, C43 +56
2
100P
4n7
C35, C36
2
22P
100nf
C38, C39
6
4n7
C49, C50, C63, C64, C77, C78
1
0.33uf
C105
12
100K
100k
R1, R3, R5, R6, R9, R24, R25, R26 +4
2
100K
120k
R2, R4
4
110K
100k
R7, R8, R35, R36
182
100k
R10, R11, R68, R69, R70, R71, R72, R74 +174
1
20K
100k
R12
3
20K
20k
R13, R14, R60
1
100K
47K
R15
1
100
47K
R16
2
100K
16k
R17, R18
1
500K
2.4k
R19
1
100K
2.4k
R20
2
51K
100k
R21, R57
1
100K
110k
R22
1
10K
100k
R23
2
100K
10k
R29, R31
2
50K
10k
R30, R32
2
50K
100k
R33, R34
3
100K
1K
R37, R38, R44
4
51K
1K
R39, R40, R41, R42
2
10K
1K
R43, R50
1
24K
1K
R45
4
20K
1K
R46, R49, R55, R56
1
4.02K
1K
R47
2
4.75K
1K
R48, R52
1
270
1K
R51
1
267K
1K
R53
1
4.7K
1K
R54
16
110k
R58, R93, R101, R102, R136, R144, R145, R179 +8
1
5.1K
110k
R59
1
12.7K
20k
R61
1
80K
47K
R62
1
62K
47K
R63
1
20K
16k
R64
21
16k
R65, R88, R89, R107, R108, R131, R132, R150 +13
22
2.4k
R66, R67, R90, R91, R109, R110, R133, R134 +14
10
120k
R73, R75, R116, R118, R159, R161, R202, R204 +2
2
33K
100k
R81, R83
20
20k
R84, R85, R103, R104, R127, R128, R146, R147 +12
20
47K
R86, R87, R105, R106, R129, R130, R148, R149 +12
6
1k
R305, R306, R329, R330, R363, R364
2
10k
R359, R360

Panning Mixer design files

The KiCad project lives in the powsplatboom/Synth-DIY repository on GitHub; these links point at the commit this page was built from.

Panning Mixer: common questions

How big is the Panning Mixer PCB?

The Panning Mixer measures 243.8 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Panning Mixer?

633 components, from 90 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panning Mixer design files?

From the powsplatboom/Synth-DIY repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Panning Mixer design in my own project?

The repository has no license, so all rights stay with powsplatboom. Use it as a reference, and ask the author before reusing the design.

More boards in Synth-DIY

Similar boards