PMAN/SW - switch module
About the PMAN/SW - switch module
PMAN/SW - switch module is an open source PCB design by pozsarzs, published on GitHub under the EUPL-1.2 license. It is a 2-layer board measuring 107.2 × 50.6 mm, with 75 components from 10 distinct parts.
By type, the board carries 34 diodes, 32 switches, 5 connectors and 4 resistors.
It belongs with the retro computing designs in this gallery.
From the project
8-bit microcomputer built from commercially available and home-built components
The PMAN-SW module is the component of the Manual control panel, which contains 32 switches, 8 pushbuttons and 4 LEDs. Switches and six pushbuttons connected in a matrix. The module has four row selection lines and eight column output line. The other components are connected separately. The module does not require power voltage to operate.
There is no jumper setting option on the module.
PMAN/SW - switch module bill of materials (BOM)
75 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 24 | SW_SPDT | SW_SMTS | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +16 |
| 8 | SW_Push | PinHeader_1x02_P2.54mm_Vertical | SW25, SW26, SW27, SW28, SW29, SW30, SW31, SW32 |
| 24 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +16 |
| 6 | 1N4148 | D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D25, D26, D27, D28, D29, D30 |
| 4 | LED | LED_D3.0mm | D31, D32, D33, D34 |
| 4 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1, R2, R3, R4 |
PMAN/SW - switch module design files
The KiCad project lives in the pozsarzs/zacchaeus repository on GitHub; these links point at the commit this page was built from.
PMAN/SW - switch module: common questions
How big is the PMAN/SW - switch module?
The PMAN/SW - switch module measures 107.2 × 50.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PMAN/SW - switch module?
75 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the PMAN/SW - switch module design files?
From the pozsarzs/zacchaeus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PMAN/SW - switch module design in my own project?
Yes, under the terms of its EUPL-1.2 license, which pozsarzs chose for the repository.
More boards in zacchaeus
PIOI I/O interface module
238.5 × 59.7 mm83 parts2LEUPL-1.20
PEMX - External memory box
150.5 × 219.1 mm79 parts2LEUPL-1.20
PCOX - COVOX module
102.6 × 72.4 mm56 parts2LEUPL-1.20
PPOW - Power distribution modul
154.9 × 80 mm48 parts2LEUPL-1.20
AVR/ArduinoControl and communication card
160 × 100.3 mm45 parts2LEUPL-1.20
PMAN-IF Interface module
106.3 × 85.1 mm39 parts2LEUPL-1.20
PMAN/DP - display module
115.6 × 42.6 mm21 parts2LEUPL-1.20
PSPK Speaker amplifier module
48.3 × 57.2 mm16 parts2LEUPL-1.20
Similar boards
Amiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Atari pickup
26.4 × 53.9 mm7 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k