Custom flight controller
Prateek-elec·custom-flight-controller-pcb·hardware/kicad/fc002.kicad_pcb
About the Custom flight controller PCB
Custom flight controller is an open source STM32 PCB design by Prateek-elec, published on GitHub under the MIT license. It is a 4-layer board measuring 36 × 36 mm, with 82 components from 50 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the ICM-42688-P, W25Q128JVS, TPS54302, AP2112K-3.3TRG1 and BMP388. By type, the board carries 28 capacitors, 23 resistors, 8 ICs, 7 diodes, 3 connectors and 2 transistors.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Custom drone flight controller PCB designed in KiCad with STM32, IMU sensors, regulated power rails, USB interface and expansion headers.
A custom-designed drone flight controller PCB built for UAV / robotics applications. This repository contains schematic + PCB layout designed in KiCad, along with documentation and renders.
Main components on the Custom flight controller
Custom flight controller bill of materials (BOM)
82 components, 50 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM-42688-P | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
| 1 | STM32F405RGT6 | LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm | U2 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 2 | TPS54302 | SOT-23-6 | U4, U5 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U6 |
| 1 | BMP388 | ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y | U7 |
| 1 | MAX7456EUI_ | TSSOP-28_4.4x9.7mm_P0.65mm | U8 |
| 1 | AO3400A | SuperSOT-3 | Q1 |
| 1 | AO3401A | SOT-23 | Q3 |
| 1 | Crystal_GND2_Small | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | X1 |
| 1 | 27MHz | Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | X2 |
| 1 | ESC | JST_GH_SM09B-GHS-TB_1x09-1MP_P1.25mm_Horizontal | J1 |
| 1 | HD_VTX | JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal | J4 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 2 | 0.1uF | C_0402_1005Metric | C_IMU_100n4, C_IMU_100n5 |
| 1 | C_Polarized | C_0603_1608Metric | Csag1 |
| 1 | Fuse_Small | Fuse_1206_3216Metric | F1 |
| 2 | 4.7K | R_0402_1005Metric | R_I2C_Pull1, R_I2C_Pull2 |
| 1 | SW_Push | SW_SPST_TS-1088-xR020 | SW1 |
| 1 | MM3Zxx | D_SOD-323F | D1 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D_Schottky_Dual_CommonCathode_AAK_Parallel | D_0201_0603Metric | D2 |
| 1 | STATE_LED(BLUE) | LED_0201_0603Metric | D10 |
| 1 | STATE_LED(YELLOW) | LED_0201_0603Metric | D11 |
| 1 | LED(RED)9V | LED_0201_0603Metric | D12 |
| 1 | LED5V(RED) | LED_0201_0603Metric | D13 |
| 1 | LED(RED)3.3V | LED_0201_0603Metric | D14 |
| 1 | 15uH | L_6.3x6.3_H3 | L1 |
| 1 | 10uH | L_6.3x6.3_H3 | L2 |
| 1 | 10uF | C_0402_1005Metric | C1 |
| 11 | 100nF | C_0402_1005Metric | C2, C5, C6, C7, C8, C9, C10, C11 +3 |
| 2 | 2.2uF | C_0402_1005Metric | C3, C4 |
| 2 | 10uF | C_1206_3216Metric | C12, C16 |
| 2 | 100nF | C_0201_0603Metric | C13, C14 |
| 1 | 150pF | C_0603_1608Metric | C15 |
| 2 | 100nF | C_0603_1608Metric | C17, C18 |
| 2 | 47uF | C_1206_3216Metric | C19, C21 |
| 1 | 100pF | C_0603_1608Metric | C20 |
| 2 | 1uF | C_0402_1005Metric | C22, C23 |
| 1 | C_Polarized | C_0603_1608Metric | C27 |
| 1 | 0.1uF | C_0603_1608Metric | C28 |
| 5 | 10K | R_0402_1005Metric | R1, R9, R10, R20, R27 |
| 5 | 4.7K | R_0402_1005Metric | R4, R5, R6, R7, R8 |
| 2 | 5.1K | R_0402_1005Metric | R11, R12 |
| 2 | 22 | R_0402_1005Metric | R14, R15 |
| 1 | 18K | R_0402_1005Metric | R16 |
| 1 | 2K | R_0402_1005Metric | R17 |
| 3 | 100K | R_0402_1005Metric | R18, R21, R23 |
| 1 | 6.2K | R_0402_1005Metric | R19 |
| 1 | 12.3K | R_0402_1005Metric | R22 |
| 2 | 75 | R_0402_1005Metric | R25, R35 |
Custom flight controller design files
The KiCad project lives in the Prateek-elec/custom-flight-controller-pcb repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/kicad/fc002.kicad_pcb
- Schematichardware/kicad/fc002.kicad_sch
Custom flight controller: common questions
What microcontroller does the Custom flight controller use?
The Custom flight controller is built around the STM32F405RGT6, from the STM32 family.
How big is the Custom flight controller PCB?
The Custom flight controller measures 36 × 36 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Custom flight controller?
82 components, from 50 distinct parts. The full bill of materials is listed on this page.
Where can I download the Custom flight controller design files?
From the Prateek-elec/custom-flight-controller-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Custom flight controller design in my own project?
Yes, under the terms of its MIT license, which Prateek-elec chose for the repository.
Can I test firmware for the Custom flight controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k