7 open source boards using the MAX7456EUI_
Real designs built with the MAX7456EUI_, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sabre-Integrated flight controller
CircuitGuy943
60 × 137.1 mm260 parts4LGPL-3.02STM32
YecnodF405
limiez1011
40 × 40 mm116 parts6LGPL-3.00STM32
YecnodF405
lmiez
40 × 40 mm116 parts6LGPL-3.00STM32
Custom flight controller
Prateek-elec
36 × 36 mm82 parts4LMIT0STM32
KiKit Output
k4i70
115.5 × 90 mm67 parts4LNo license0STM32
RPi Car
k4i70
36.5 × 36.5 mm67 parts4LNo license0STM32
RPi Car.recovered.2026-05-17 124818
k4i70
36.5 × 36.5 mm67 parts4LNo license0
How designs wire the MAX7456EUI_
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MAX7456EUI_ connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a series capacitor on 4 of 5 designs, most often 100 nF.
- The PVDD pin has a capacitor to GND on 4 of 5 designs, most often 100 nF.
- The SAG pin has a series capacitor on 4 of 5 designs, most often 470 nF (then 22 µF).
- The VOUT pin has a series capacitor on 4 of 5 designs, most often 470 nF (then 100 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| N.Cpin 1, 2, 13, 14, 15, 16, 27, 28 | Connected to: Not connected 100% | — |
| DVDDpin 3 | Connected to: 5V 60% · a signal 40% |
|
| DGNDpin 4 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| CLKINpin 5 | Connected to: Signal 80% · not connected 20% |
|
| XFBpin 6 | Connected to: Not connected 60% · a signal 40% | — |
| CLKOUTpin 7 | Connected to: Not connected 60% · a signal 40% |
|
| CSpin 8 | Connected to: The microcontroller 80% |
|
| LOSpin 12 | Connected to: Not connected 60% · a signal 40% | — |
| VSYNCpin 17 | Connected to: Not connected 80% · a signal 20% | — |
| HSYNCpin 18 | Connected to: Not connected 80% · a signal 20% | — |
| RESETpin 19 | Connected to: 5V 60% · a signal 40% | — |
| AGNDpin 20 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| AVDDpin 21 | Connected to: 5V 60% · a signal 40% |
|
| VINpin 22 | Connected to: VIN2 40% · not connected 20% · a signal 40% |
|
| PGNDpin 23 | Connected to: GND 80% · a signal 20% | — |
| PVDDpin 24 | Connected to: Signal 60% · 5V 40% |
|
| SAGpin 25 | Connected to: Signal 80% · not connected 20% |
|
| VOUTpin 26 | Connected to: Signal 60% · not connected 20% · 5V 20% |
|
| EPpin 29 | Connected to: GND 75% · not connected 25% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sabre-Integrated flight controller by CircuitGuy943, KiKit Output by k4i70, YecnodF405 by limiez1011 and YecnodF405 by lmiez.
The MAX7456EUI_ in open source designs
The gallery holds 7 open source boards using the MAX7456EUI_ from 5 GitHub repositories; a typical one measures about 40 × 40 mm and carries around 82 components.
100% use four copper layers or more, and 57% carry an open source license.
The most starred is Sabre-Integrated flight controller by CircuitGuy943.
Parts used alongside the MAX7456EUI_
Microcontrollers on boards using the MAX7456EUI_
What boards using the MAX7456EUI_ are built for
MAX7456EUI_: common questions
Where can I find a MAX7456EUI_ reference design?
Each of the 7 boards on this page is a real design using the MAX7456EUI_. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX7456EUI_ VIN pin connected?
The VIN pin has a series capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MAX7456EUI_.
How is the MAX7456EUI_ PVDD pin connected?
The PVDD pin has a capacitor to GND on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MAX7456EUI_.
How is the MAX7456EUI_ SAG pin connected?
The SAG pin has a series capacitor on 4 of 5 designs, most often 470 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the MAX7456EUI_.
What parts are used alongside the MAX7456EUI_?
The ICM-42688-P, LDL212PV33R, MP4420GJ-P, MS561101BA03-50 and STM32F405RGTx appear in the most repositories here.
Which microcontrollers do boards using the MAX7456EUI_ use?
Most are built on STM32 (7).
How big is a typical board using the MAX7456EUI_?
The median is 40 × 40 mm, and 0% are two-layer designs.
What is the most popular open source board using the MAX7456EUI_?
By GitHub stars, Sabre-Integrated flight controller by CircuitGuy943, with 2 stars.
Can I simulate one of these boards using the MAX7456EUI_ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.