WebRadio-ESP32-VS1053
pschneider67·WebRadio-ESP32-VS1053
About the WebRadio-ESP32-VS1053 PCB
WebRadio-ESP32-VS1053 is an open source ESP32 PCB design by pschneider67, published on GitHub. It is a 2-layer board measuring 91.5 × 61 mm, with 73 components from 33 distinct parts.
Its main chip is the mini_esp32, from the ESP32 family. Other key parts include the AMS1117-1.8, VS1053b, JLCPCB Marker and PAM8403D. By type, the board carries 27 capacitors, 22 resistors, 9 connectors, 5 ICs, 4 switches and 4 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
web radio with ESP32 and VS1053b
Here I show the hardware of a small Internet radio consisting of: - ESP32 - VS1053b - 2.2" TFT display - Amplifier module PAM8403
The boards were created with KiCad version 8.
Main components on the WebRadio-ESP32-VS1053
WebRadio-ESP32-VS1053 bill of materials (BOM)
73 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-1.8 | SOT-223 | U1 |
| 1 | mini_esp32 | ESP32_mini | U2 |
| 1 | VS1053b | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | JLCPCB Marker | JLCPCB-Marker | U5 |
| 1 | PAM8403D | SOP-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | 12,288MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 3 | JST PH 2mm | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2, J3, J7 |
| 1 | AudioJack3 | Jack_3.5mm_SMT_Horizontal | J4 |
| 1 | JST PH 2mm | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6 |
| 1 | Conn_01x05 | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J8 |
| 1 | Conn_01x04 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J9 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | P1 |
| 1 | TFT2.2_SPI_4P_SD | TFT2.2_SPI_5P_SD | DS2 |
| 4 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 3 | Power LED | LED_D3.0mm_SMD | D1, D2, D3 |
| 1 | Power LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 10 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C4, C5, C7, C13, C16, C17 +2 |
| 1 | 47µF | CP_Elec_5x5.4 | C3 |
| 6 | 1µF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C20, C22, C23, C25, C26 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C9 |
| 1 | 47nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10 |
| 2 | 22p | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 2 | 220nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14, C15 |
| 2 | 10µF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C21, C24 |
| 1 | 100µF | CP_Elec_5x5.4 | C27 |
| 3 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3 |
| 8 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R6, R7, R8, R10, R11, R19, R23 |
| 1 | 4k7 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 4 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R14, R16, R17 |
| 2 | 20R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13 |
| 3 | 10R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R20, R21 |
| 1 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
WebRadio-ESP32-VS1053 design files
The KiCad project lives in the pschneider67/WebRadio-ESP32-VS1053 repository on GitHub; these links point at the commit this page was built from.
WebRadio-ESP32-VS1053: common questions
What microcontroller does the WebRadio-ESP32-VS1053 use?
The WebRadio-ESP32-VS1053 is built around the mini_esp32, from the ESP32 family.
How big is the WebRadio-ESP32-VS1053 PCB?
The WebRadio-ESP32-VS1053 measures 91.5 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WebRadio-ESP32-VS1053?
73 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the WebRadio-ESP32-VS1053 design files?
From the pschneider67/WebRadio-ESP32-VS1053 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the WebRadio-ESP32-VS1053 design in my own project?
The repository has no license, so all rights stay with pschneider67. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WebRadio-ESP32-VS1053 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k