15 open source boards using the mini_esp32
Real designs built with the mini_esp32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Honeywell-HPAx00-ESPHome
flaviut
215.9 × 50.8 mm27 parts2LNo license17ESP32
ESP32 mini 8Port WLED
w4b-zero
130.1 × 62 mm25 parts2LGPL-3.016NXP
Teensy fendt-CAN
tomstix
112 × 64 mm46 parts2LNo license4ESP32
WebRadio-ESP32-VS1053
pschneider67
91.5 × 61 mm73 parts2LNo license1NXP
Cascade trigger
r0oland
144.8 × 77.5 mm69 parts2LApache-2.00ESP32
Micronova stove esphome
r-hmn
65 × 47 mm20 parts4LGPL-3.00ESP32
SmartRV-AIO-THT
RoBro92
138.8 × 78.6 mm55 parts2LAGPL-3.04Coroam brains
r0oland
124.5 × 50.5 mm42 partsApache-2.00ESP32
RatGDO-OpenSource-D1Mini-ESP32
scottdube
62 × 89.7 mm21 parts2LMIT0ESP32
RatGDO-OpenSource-D1Mini-ESP32
Kaldek
51.8 × 63.4 mm12 parts2LMIT506ESP32
Test 08. With ESP32 mini
henkjannl
72 × 32 mm25 parts2LMIT1ESP8266
Bioterio v01
r0oland
47 × 95.3 mm18 parts2LApache-2.00ESP32
Unijoysticle 2 - Flashparty Edition
ricardoquesada
61 × 55.2 mm20 parts2LSHL-2.162ESP32
Interconnect
henkjannl
96 × 75 mm12 parts2LMIT1ESP32
ESP32-D1Mini-HUB75
DaveRichmond
62 × 63.8 mm5 parts2LCustom license0
How designs wire the mini_esp32
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the mini_esp32 connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin is left unconnected on 12 of 12 designs.
- The IO_35 pin is left unconnected on 11 of 12 designs.
- The IO_09/SD2 pin is left unconnected on 11 of 11 designs.
- The CMD pin is left unconnected on 11 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 22, 33 | Connected to: GND 85% | — |
| RSTpin 2 | Connected to: Not connected 100% | — |
| NCpin 3, 15 | Connected to: Not connected 96% | — |
| IO_36/SVP/A0pin 4 | Connected to: Not connected 75% · a signal 17% | — |
| IO_39/SVNpin 5 | Connected to: Not connected 83% · a signal 17% | — |
| IO_26/D0pin 6 | Connected to: Not connected 67% · a signal 33% | — |
| IO_35pin 7 | Connected to: Not connected 92% | — |
| IO_33pin 9 | Connected to: Not connected 67% · a signal 25% | — |
| IO_34pin 11 | Connected to: Not connected 83% · a signal 17% | — |
| IO_14/TMSpin 13 | Connected to: Not connected 73% · a signal 27% | — |
| IO_05/D8pin 14 | Connected to: Not connected 73% · a signal 27% | — |
| 3V3pin 16 | Connected to: 3.3V 73% · not connected 18% | — |
| IO_09/SD2pin 17 | Connected to: Not connected 100% | — |
| IO_13/TCKpin 18 | Connected to: Not connected 64% · a signal 36% | — |
| CMDpin 19 | Connected to: Not connected 100% | — |
| IO_10/SD3pin 20 | Connected to: Not connected 100% | — |
| TXDpin 21 | Connected to: Not connected 82% · a signal 18% | — |
| RXDpin 23 | Connected to: Not connected 82% · a signal 18% | — |
| IO_22/D1/SCLpin 25 | Connected to: A connector 27% · not connected 18% |
|
| IO_12/TDIpin 30 | Connected to: Not connected 64% · a signal 36% | — |
| IO_00pin 34 | Connected to: Not connected 82% · a signal 18% | — |
| VCC_(USB)pin 35 | Connected to: 5V 91% | — |
| IO_02pin 36 | Connected to: Not connected 73% · a signal 27% | — |
| TD0pin 37 | Connected to: Not connected 73% · a signal 27% | — |
| SD1pin 38 | Connected to: Not connected 100% | — |
| SD0pin 39 | Connected to: Not connected 100% | — |
| CLKpin 40 | Connected to: Not connected 100% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RatGDO-OpenSource-D1Mini-ESP32 by Kaldek, Unijoysticle 2 - Flashparty Edition by ricardoquesada, Honeywell-HPAx00-ESPHome by flaviut and ESP32 mini 8Port WLED by w4b-zero.
The mini_esp32 in open source designs
The gallery holds 15 open source boards using the mini_esp32 from 12 GitHub repositories; a typical one measures about 91.5 × 63.4 mm and carries around 25 components.
93% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is RatGDO-OpenSource-D1Mini-ESP32 by Kaldek.
What boards using the mini_esp32 are built for
mini_esp32: common questions
Where can I find a mini_esp32 reference design?
Each of the 15 boards on this page is a real design using the mini_esp32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the mini_esp32 RST pin connected?
The RST pin is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the mini_esp32.
How is the mini_esp32 IO_35 pin connected?
The IO_35 pin is left unconnected on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the mini_esp32.
How is the mini_esp32 IO_09/SD2 pin connected?
The IO_09/SD2 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 12 open source designs using the mini_esp32.
Which microcontrollers do boards using the mini_esp32 use?
Most are built on ESP32 (11), NXP (2) and ESP8266 (1).
How big is a typical board using the mini_esp32?
The median is 91.5 × 63.4 mm, and 93% are two-layer designs.
What is the most popular open source board using the mini_esp32?
By GitHub stars, RatGDO-OpenSource-D1Mini-ESP32 by Kaldek, with 506 stars.
Can I simulate one of these boards using the mini_esp32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.