7 open source boards using the VS1053B

Real designs built with the VS1053B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the VS1053B

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the VS1053B connects to, and the resistors, capacitors and other passives placed on it.

  • The XTALO pin has a capacitor to GND on 7 of 7 designs, most often 33 pF (then 22 pF).
  • The XTALI pin has a capacitor to GND on 7 of 7 designs, most often 33 pF (then 22 pF).
  • The XTALO pin has a series resistor on 6 of 7 designs, most often 1 MΩ.
  • The XTALO pin has a crystal on 6 of 7 designs, most often 12.288 MHz (then 14 MHz).
MICP/LINE1pin 1Connected to: Not connected 71% · a signal 29%
MICNpin 2Connected to: Not connected 100%
XRESETpin 3Connected to: The microcontroller 29%
  • Resistor to GND on 43% · 100 kΩ (2), 1 kΩ (1)
DGND0pin 4Connected to: GND 100%
CVDD0pin 5Connected to: 1.8V 100%
  • Decoupling capacitor on 71% · 100 nF (7), 10 µF (1)
IOVDD0pin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 43% · 100 nF (3)
CVDD1pin 7Connected to: 1.8V 86%
  • Decoupling capacitor on 71% · 100 nF (7), 10 µF (1)
GPIO2/DCLKpin 9Connected to: Signal 86%
  • Resistor to GND on 57% · 100 kΩ (4)
GPIO3/SDATApin 10Connected to: Signal 86%
  • Resistor to GND on 57% · 100 kΩ (4)
GPIO6/I2S_SCLKpin 11Connected to: A connector 29%
  • Resistor to GND on 57% · 100 kΩ (3), 6.8 kΩ (1)
GPIO7/I2S_SDATApin 12Connected to: A connector 29%
  • Resistor to GND on 57% · 100 kΩ (3), 6.8 kΩ (1)
IOVDD1pin 14Connected to: 3.3V 86%
  • Decoupling capacitor on 43% · 100 nF (7), 10 µF (1)
VCOpin 15Connected to: Not connected 100%
DGND1pin 16Connected to: GND 86%
XTALOpin 17Connected to: Signal 100%
  • Capacitor to GND on 100% · 33 pF (3), 22 pF (2), 20 pF (1)
  • Series resistor on 86% · 1 MΩ (6)
  • Crystal on 86% · 12.288 MHz (4), 14 MHz (1)
XTALIpin 18Connected to: Signal 100%
  • Capacitor to GND on 100% · 33 pF (3), 22 pF (2), 20 pF (1)
  • Series resistor on 86% · 1 MΩ (6)
  • Crystal on 86% · 12.288 MHz (4), 14 MHz (1)
IOVDD2pin 19Connected to: 3.3V 86%
  • Decoupling capacitor on 43% · 100 nF (6), 10 µF (1)
DGND2pin 20Connected to: GND 86%
DGND3pin 21Connected to: GND 86%
DGND4pin 22Connected to: GND 86%
CVDD2pin 24Connected to: 1.8V 86%
  • Decoupling capacitor on 57% · 100 nF (5), 10 µF (1), 1 µF (1)
GPIO5/I2S_MCLKpin 25Connected to: Signal 86%
  • Resistor to GND on 57% · 100 kΩ (3), 6.8 kΩ (1)
RXpin 26Connected to: Signal 57% · not connected 29%
  • Pull-up to 3.3V on 57% · 100 kΩ (4)
TXpin 27Connected to: Not connected 86%
CVDD3pin 31Connected to: 1.8V 86%
  • Decoupling capacitor on 43% · 100 nF (3), 10 µF (1)
XTESTpin 32Connected to: 3.3V 71%
GPIO0pin 33Connected to: Signal 71% · not connected 29%
  • Resistor to GND on 71% · 100 kΩ (4), 6.8 kΩ (1)
GPIO1pin 34Connected to: Signal 100%
  • Resistor to GND on 71% · 100 kΩ (3), 6.8 kΩ (1), 10 kΩ (1)
GNDpin 35Connected to: GND 100%
GPIO4/I2S_LROUTpin 36Connected to: Signal 86%
  • Resistor to GND on 57% · 100 kΩ (3), 6.8 kΩ (1)
AGND0pin 37Connected to: GND 100%
AVDD0pin 38Connected to: 3.3V 100%
  • Decoupling capacitor on 71% · 100 nF (10), 10 µF (2)
RIGHTpin 39Connected to: A connector 29%
  • Series capacitor on 57% · 1 µF (2), 10 µF (1), 470 nF (1)
  • Series resistor on 57% · 20 Ω (4), 10 kΩ (1)
AGND1pin 40Connected to: GND 86%
AGND2pin 41Connected to: GND 86%
GBUFpin 42Connected to: A connector 57% · not connected 29%
  • Series resistor on 57% · 10 Ω (3), 20 Ω (1)
AVDD1pin 43Connected to: 3.3V 86%
  • Decoupling capacitor on 71% · 100 nF (11), 10 µF (1)
RCAPpin 44Connected to: Signal 86%
  • Capacitor to GND on 86% · 1 µF (4), 100 nF (2)
AVDD2pin 45Connected to: 3.3V 86%
  • Decoupling capacitor on 71% · 100 nF (10), 10 µF (1)
LEFTpin 46Connected to: A connector 29%
  • Series capacitor on 57% · 1 µF (2), 10 µF (1), 470 nF (1)
  • Series resistor on 57% · 20 Ω (4), 10 kΩ (1)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZXEVO.1010 (TOP board) by UzixLS, Daughterboard by bfrigon, Badge by aramcon-badge and Audio-Devboard by Outdatedcandy92.

The VS1053B in open source designs

The gallery holds 7 open source boards using the VS1053B from 7 GitHub repositories; a typical one measures about 85 × 99.6 mm and carries around 80 components.

86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is ZXEVO.1010 (TOP board) by UzixLS.

Parts used alongside the VS1053B

Microcontrollers on boards using the VS1053B

VS1053B: common questions

Where can I find a VS1053B reference design?

Each of the 7 boards on this page is a real design using the VS1053B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the VS1053B XTALO pin connected?

The XTALO pin has a capacitor to GND on 7 of 7 designs, most often 33 pF (then 22 pF). Counted from the KiCad layouts of 7 open source designs using the VS1053B.

How is the VS1053B XTALI pin connected?

The XTALI pin has a capacitor to GND on 7 of 7 designs, most often 33 pF (then 22 pF). Counted from the KiCad layouts of 7 open source designs using the VS1053B.

How is the VS1053B RCAP pin connected?

The RCAP pin has a capacitor to GND on 6 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the VS1053B.

Which microcontrollers do boards using the VS1053B use?

Most are built on ESP32 (2), AVR/Arduino (1), ESP8266 (1) and STM32 (1).

How big is a typical board using the VS1053B?

The median is 85 × 99.6 mm, and 86% are two-layer designs.

What is the most popular open source board using the VS1053B?

By GitHub stars, ZXEVO.1010 (TOP board) by UzixLS, with 24 stars.

Can I simulate one of these boards using the VS1053B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part