Insect tag v8 battery
pvnkmrksk·gantu-tag·irulu/insect_tag_v8_battery.kicad_pcb
About the Insect tag v8 battery PCB
Insect tag v8 battery is an open source PCB design by pvnkmrksk, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 7.2 × 16.5 mm, with 6 components from 5 distinct parts.
Other key parts include the IN100-Q1-R-RC1I. By type, the board carries 3 capacitors, 1 IC, 1 crystal and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
An open Bluetooth LE beacon tag for insects built around the InPlay IN100 NanoBeacon, derived from v7. The cell sits centred under the IN100: its − cap goes on one large pad on the underside, and one short wire runs from a rim pad to the can. JLCPCB fits every part; you add the c
An open Bluetooth LE beacon tag for insects built around the InPlay IN100 NanoBeacon, derived from v7. The cell sits centred under the IN100: its − cap goes on one large pad on the underside, and one short wire runs from a rim pad to the can. JLCPCB fits every part; you add the cell, a 31 mm antenna wire and epoxy.
v8.1 was the compact layout: Ø 7.2 mm instead of 8 mm plus antenna lobes, with the same parts and package sizes. The antenna and counterpoise wires solder flat onto edge pads on the top side.

Main components on the Insect tag v8 battery
Insect tag v8 battery bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN100-Q1-R-RC1I InPlay | InPlay_IN100_QFN-18-1EP_3x3mm_P0.4mm_EP1.5x1.7mm | U1 |
| 1 | 8Q26000008 26MHz 7pF TXC | Crystal_SMD_1612-4Pin_1.6x1.2mm | Y1 |
| 1 | GRM21BR60J107ME15L 100uF 6.3V X5R Murata | C_0805_2012Metric | C1 |
| 2 | CL05B104KO5NNNC 100nF Samsung | C_0402_1005Metric | C2, C4 |
| 1 | 0402WGF1004TCE 1M UNI-ROYAL | R_0402_1005Metric | R1 |
Insect tag v8 battery design files
The KiCad project lives in the pvnkmrksk/gantu-tag repository on GitHub; these links point at the commit this page was built from.
Insect tag v8 battery: common questions
How big is the Insect tag v8 battery PCB?
The Insect tag v8 battery measures 7.2 × 16.5 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Insect tag v8 battery?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Insect tag v8 battery design files?
From the pvnkmrksk/gantu-tag repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Insect tag v8 battery design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which pvnkmrksk chose for the repository.
More boards in gantu-tag
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k