Insect tag v8 solar panel
pvnkmrksk·gantu-tag·hagalu/fab/insect_tag_v8_solar_panel.kicad_pcb
About the Insect tag v8 solar panel PCB
Insect tag v8 solar panel is an open source PCB design by pvnkmrksk, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 82 × 56.9 mm, with 18 components from 13 distinct parts.
Other key parts include the IN100-Q1-R-RC1I and TPS3831G18DQNR. By type, the board carries 3 capacitors, 2 ICs, 2 antennas, 2 resistors, 1 crystal and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
A battery-free IN100 NanoBeacon tag, 6.4 × 12.55 mm (about 1 : 2). Six broadband photodiodes in a 2 × 3 block cover the top half and the IN100 sits in the bottom half. A programming tail at the bottom is cut off after programming. The photodiode string charges a 100 µF capacitor
A battery-free IN100 NanoBeacon tag, 6.4 × 12.55 mm (about 1 : 2). Six broadband photodiodes in a 2 × 3 block cover the top half and the IN100 sits in the bottom half. A programming tail at the bottom is cut off after programming. The photodiode string charges a 100 µF capacitor directly: no blocking diode, no supercap, no boost chip. On the S variants a 1 × 1 mm supervisor starts the IN100 only once the capacitor holds enough charge for a burst.

Main components on the Insect tag v8 solar panel
Insect tag v8 solar panel bill of materials (BOM)
18 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN100-Q1-R-RC1I InPlay | InPlay_IN100_QFN-18-1EP_3x3mm_P0.4mm_EP1.5x1.7mm | U1 |
| 1 | TPS3831G18DQNR Texas Instruments | Texas_X2SON-4_1x1mm_P0.65mm | U2 |
| 1 | 8Q26000008 26MHz 7pF TXC | Crystal_SMD_1612-4Pin_1.6x1.2mm | Y1 |
| 1 | PROG | ProgPads_2x02_P2.54mm_D1.6mm_THT_Tab | J1 |
| 1 | Wire 31mm | WirePadB_Edge_1p2x1p0mm | AE1 |
| 1 | Counterpoise (optional) | WirePadB_Edge_1p2x1p0mm | AE2 |
| 6 | TEMD7000X01 Vishay | PD_0805_TEMD7000 | PD1, PD2, PD3, PD4, PD5, PD6 |
| 1 | RB751S40T1G onsemi | D_SOD-523 | D2 |
| 1 | GRM21BR60J107ME15L 100uF 6.3V X5R Murata | C_0805_2012Metric | C1 |
| 1 | CL05B104KO5NNNC 100nF Samsung | C_0402_1005Metric | C4 |
| 1 | CC0402KRX5R6BB334 330nF 10V X5R YAGEO | C_0402_1005Metric | C5 |
| 1 | 0402WGF1004TCE 1M UNI-ROYAL | R_0402_1005Metric | R1 |
| 1 | 0402WGF1005TCE 10M UNI-ROYAL | R_0402_1005Metric | R2 |
Insect tag v8 solar panel design files
The KiCad project lives in the pvnkmrksk/gantu-tag repository on GitHub; these links point at the commit this page was built from.
Insect tag v8 solar panel: common questions
How big is the Insect tag v8 solar panel PCB?
The Insect tag v8 solar panel measures 82 × 56.9 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Insect tag v8 solar panel?
18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Insect tag v8 solar panel design files?
From the pvnkmrksk/gantu-tag repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Insect tag v8 solar panel design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which pvnkmrksk chose for the repository.
More boards in gantu-tag
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k