Insect tag v8 solar
pvnkmrksk·gantu-tag·hagalu/insect_tag_v8_solar.kicad_pcb
About the Insect tag v8 solar PCB
Insect tag v8 solar is an open source PCB design by pvnkmrksk, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 6.4 × 20.5 mm, with 14 components from 9 distinct parts.
Other key parts include the IN100-Q1-R-RC1I and TPS3831G18DQNR. By type, the board carries 3 capacitors, 2 ICs, 1 crystal, 1 diode and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
A battery-free IN100 NanoBeacon tag, 6.4 × 12.55 mm (about 1 : 2). Six broadband photodiodes in a 2 × 3 block cover the top half and the IN100 sits in the bottom half. A programming tail at the bottom is cut off after programming. The photodiode string charges a 100 µF capacitor
A battery-free IN100 NanoBeacon tag, 6.4 × 12.55 mm (about 1 : 2). Six broadband photodiodes in a 2 × 3 block cover the top half and the IN100 sits in the bottom half. A programming tail at the bottom is cut off after programming. The photodiode string charges a 100 µF capacitor directly: no blocking diode, no supercap, no boost chip. On the S variants a 1 × 1 mm supervisor starts the IN100 only once the capacitor holds enough charge for a burst.

Main components on the Insect tag v8 solar
Insect tag v8 solar bill of materials (BOM)
14 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN100-Q1-R-RC1I InPlay | InPlay_IN100_QFN-18-1EP_3x3mm_P0.4mm_EP1.5x1.7mm | U1 |
| 1 | TPS3831G18DQNR Texas Instruments | Texas_X2SON-4_1x1mm_P0.65mm | U2 |
| 1 | 8Q26000008 26MHz 7pF TXC | Crystal_SMD_1612-4Pin_1.6x1.2mm | Y1 |
| 6 | TEMD7000X01 Vishay | PD_0805_TEMD7000 | PD1, PD2, PD3, PD4, PD5, PD6 |
| 1 | RB751S40T1G onsemi | D_SOD-523 | D2 |
| 1 | GRM21BR60J107ME15L 100uF 6.3V X5R Murata | C_0805_2012Metric | C1 |
| 1 | CL05B104KO5NNNC 100nF Samsung | C_0402_1005Metric | C4 |
| 1 | CC0402KRX5R6BB334 330nF 10V X5R YAGEO | C_0402_1005Metric | C5 |
| 1 | 0402WGF3304TCE 3.3M UNI-ROYAL | R_0402_1005Metric | R2 |
Insect tag v8 solar design files
The KiCad project lives in the pvnkmrksk/gantu-tag repository on GitHub; these links point at the commit this page was built from.
Insect tag v8 solar: common questions
How big is the Insect tag v8 solar PCB?
The Insect tag v8 solar measures 6.4 × 20.5 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Insect tag v8 solar?
14 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Insect tag v8 solar design files?
From the pvnkmrksk/gantu-tag repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Insect tag v8 solar design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which pvnkmrksk chose for the repository.
More boards in gantu-tag
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k