Insect tag v8 battery panel

pvnkmrksk·gantu-tag·irulu/fab/insect_tag_v8_battery_panel.kicad_pcb

Insect tag v8 battery panel PCB layout, top view — open source board by pvnkmrksk

About the Insect tag v8 battery panel PCB

Insect tag v8 battery panel is an open source PCB design by pvnkmrksk, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 8.2 × 6.6 mm, with 11 components from 10 distinct parts.

Other key parts include the IN100-Q1-R-RC1I. By type, the board carries 3 capacitors, 2 antennas, 1 IC, 1 crystal, 1 connector and 1 battery holder.

It belongs with the power & battery designs in this gallery.

From the project

An open Bluetooth LE beacon tag for insects built around the InPlay IN100 NanoBeacon, derived from v7. The cell sits centred under the IN100: its − cap goes on one large pad on the underside, and one short wire runs from a rim pad to the can. JLCPCB fits every part; you add the c

An open Bluetooth LE beacon tag for insects built around the InPlay IN100 NanoBeacon, derived from v7. The cell sits centred under the IN100: its − cap goes on one large pad on the underside, and one short wire runs from a rim pad to the can. JLCPCB fits every part; you add the cell, a 31 mm antenna wire and epoxy.

v8.1 was the compact layout: Ø 7.2 mm instead of 8 mm plus antenna lobes, with the same parts and package sizes. The antenna and counterpoise wires solder flat onto edge pads on the top side.

Insect tag v8 battery panel, from the project README
From the project README

Main components on the Insect tag v8 battery panel

IN100-Q1-R-RC1I

Insect tag v8 battery panel bill of materials (BOM)

11 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
IN100-Q1-R-RC1I
InPlay
U1
1
8Q26000008
26MHz 7pF
TXC
Y1
1
PROG
J1
1
Wire 31mm
AE1
1
Counterpoise (optional)
AE2
1
337 / 364 / 377
BT1
1
OFF
JP1
1
GRM21BR60J107ME15L
100uF 6.3V X5R
Murata
C1
2
CL05B104KO5NNNC
100nF
Samsung
C2, C4
1
0402WGF1004TCE
1M
UNI-ROYAL
R1

Insect tag v8 battery panel design files

The KiCad project lives in the pvnkmrksk/gantu-tag repository on GitHub; these links point at the commit this page was built from.

Insect tag v8 battery panel: common questions

How big is the Insect tag v8 battery panel PCB?

The Insect tag v8 battery panel measures 8.2 × 6.6 mm, has 2 copper layers and is 0.6 mm thick.

How many components are on the Insect tag v8 battery panel?

11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Insect tag v8 battery panel design files?

From the pvnkmrksk/gantu-tag repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Insect tag v8 battery panel design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which pvnkmrksk chose for the repository.

More boards in gantu-tag

Similar boards