HardLabs

SpeedyMAP

PyroMix62·ME7.5Duino·Speeduino/speeduino-202103/reference/hardware/Speedy MAP/Hardware/SpeedyMAP.kicad_pcb

SpeedyMAP PCB layout, top view — open source AVR/Arduino board by PyroMix62
Simulate this board

About the SpeedyMAP PCB

SpeedyMAP is an open source AVR/Arduino PCB design by PyroMix62, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 27 components from 16 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the VNLD5090-E, TC4424AVOA and MPX4250AP. By type, the board carries 14 capacitors, 6 ICs, 5 resistors, 1 crystal and 1 switch.

From the project

These resellers all contribute a portion of sales back to the project to allow for continued development to take place and we encourage sales through them whenever possible.

These resellers all contribute a portion of sales back to the project to allow for continued development to take place and we encourage sales through them whenever possible.

Of course, being open source, you are free to use the design files provided here to create your own hardware!

This project exists thanks to all the people who contribute, both in terms of code and testing provided. If you'd like to get involved, please have a read through Contributing and then jump on Slack to discuss things further

SpeedyMAP, from the project README
From the project README

Main components on the SpeedyMAP

ATMEGA328-AVNLD5090-ETC4424AVOAMPX4250AP

SpeedyMAP bill of materials (BOM)

27 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328-A
IC1
2
VNLD5090-E
MPX4250
U1, U3
2
TC4424AVOA
MPX4250
U2, U4
1
MPX4250AP
MCP4921-E/SN
U5
1
Crystal
Y1
1
SW_SPST
SW1
1
CC0805KRX7R9BB103
C1uF
C1
1
CC0805KKX7R7BB105
C1uF
C2
2
CC0805KRX7R9BB104
C1uF
C3, C4
3
CL21B224KOCNNNC
C0.01uF
C5, C6, C7
1
CC0805KRX7R9BB471
C0.01uF
C8
3
CC0805KRX7R9BB104
C0.3uF
C9, C10, C11
1
CL21B224KOCNNNC
C0.3uF
C12
2
CL21B224KOCNNNC
C22pF
C13, C14
4
RC0805FR-07100KL
R750
R1, R2, R3, R4
1
RC0805FR-071KL
R10k
R5

SpeedyMAP design files

The KiCad project lives in the PyroMix62/ME7.5Duino repository on GitHub; these links point at the commit this page was built from.

SpeedyMAP: common questions

What microcontroller does the SpeedyMAP use?

The SpeedyMAP is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the SpeedyMAP PCB?

The SpeedyMAP measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SpeedyMAP?

27 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SpeedyMAP design files?

From the PyroMix62/ME7.5Duino repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the SpeedyMAP design in my own project?

The repository has no license, so all rights stay with PyroMix62. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SpeedyMAP without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ME7.5Duino

Similar boards