10 open source boards using the VNLD5090-E
Real designs built with the VNLD5090-E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
DropBear
speeduino
116.1 × 98 mm196 parts2LNo license282AVR/Arduino
V0.4.4b
PyroMix62
100 × 100 mm138 parts2LNo license3STM32
UEFI-v6.x
Churrosoft
116.5 × 98 mm193 parts4LNo license2AVR/Arduino
V0.4.4b
venderbroeck
100 × 100 mm138 parts2LGPL-2.01AVR/Arduino
NA6 v1.3
speeduino
100 × 100 mm145 parts2LNo license282AVR/Arduino
SpeedyMAP
venderbroeck
100 × 100 mm27 parts2LGPL-2.01AVR/Arduino
V0.4.4c
speeduino
100 × 100 mm142 parts2LNo license282AVR/Arduino
SpeedyMAP
PyroMix62
100 × 100 mm27 parts2LNo license3AVR/Arduino
V0.4.4d
speeduino
100 × 100 mm141 parts2LNo license282AVR/Arduino
V0.4.4b
speeduino
100 × 100 mm138 parts2LNo license282
The VNLD5090-E in open source designs
The gallery holds 10 open source boards using the VNLD5090-E from 4 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 140 components.
90% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is DropBear by speeduino.
Parts used alongside the VNLD5090-E
Microcontrollers on boards using the VNLD5090-E
VNLD5090-E: common questions
Where can I find a VNLD5090-E reference design?
Each of the 10 boards on this page is a real design using the VNLD5090-E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the VNLD5090-E?
The SP720ABTG, TC4424AVOA, LM2940S-5.0/NOPB, MPX4250AP and Pololu_Breakout_DRV8825 appear in the most repositories here.
Which microcontrollers do boards using the VNLD5090-E use?
Most are built on AVR/Arduino (8), ESP32 (1) and STM32 (1).
How big is a typical board using the VNLD5090-E?
The median is 100 × 100 mm, and 90% are two-layer designs.
What is the most popular open source board using the VNLD5090-E?
By GitHub stars, DropBear by speeduino, with 282 stars.
Can I simulate one of these boards using the VNLD5090-E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.