12 open source boards using the TC4424AVOA

Real designs built with the TC4424AVOA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the TC4424AVOA

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TC4424AVOA connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_A pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
NCpin 1, 8Connected to: Not connected 67% · a signal 17%
OUT_Apin 7Connected to: A connector 60% · GND 20%
  • Series resistor on 40% · 1 kΩ (2)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DropBear by speeduino, OPEN ECU by aeonSolutions, OpenEFI rev4 by Churrosoft and SpeedyMAP by PyroMix62.

The TC4424AVOA in open source designs

The gallery holds 12 open source boards using the TC4424AVOA from 7 GitHub repositories; a typical one measures about 108 × 100 mm and carries around 140 components.

67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is DropBear by speeduino.

Microcontrollers on boards using the TC4424AVOA

TC4424AVOA: common questions

Where can I find a TC4424AVOA reference design?

Each of the 12 boards on this page is a real design using the TC4424AVOA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TC4424AVOA OUT_A pin?

The OUT_A pin has a series resistor on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the TC4424AVOA.

What parts are used alongside the TC4424AVOA?

The SP720ABTG, MCZ33810EK, VNLD5090-E, BMP280 and LM2940S-5.0/NOPB appear in the most repositories here.

Which microcontrollers do boards using the TC4424AVOA use?

Most are built on AVR/Arduino (6), STM32 (3) and ESP32 (2).

How big is a typical board using the TC4424AVOA?

The median is 108 × 100 mm, and 67% are two-layer designs.

What is the most popular open source board using the TC4424AVOA?

By GitHub stars, DropBear by speeduino, with 282 stars.

Can I simulate one of these boards using the TC4424AVOA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part