12 open source boards using the MPX4250AP
Real designs built with the MPX4250AP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
V0.4.4b
PyroMix62
100 × 100 mm138 parts2LNo license3AVR/Arduino
ECU STM V1
mstevanin4
93 × 108 mm201 parts4LNo license1AVR/Arduino
V0.4.4b
venderbroeck
100 × 100 mm138 parts2LGPL-2.01DP1600i
Hocus-Pocus
120.4 × 100.1 mm121 parts2LNo license1AVR/Arduino
Smart-Ventilator
yesitha
156.3 × 179.5 mm69 parts2LNo license0AVR/Arduino
NA6 v1.3
speeduino
100 × 100 mm145 parts2LNo license282AVR/Arduino
SpeedyMAP
venderbroeck
100 × 100 mm27 parts2LGPL-2.01AVR/Arduino
V0.4.4c
speeduino
100 × 100 mm142 parts2LNo license282AVR/Arduino
SpeedyMAP
PyroMix62
100 × 100 mm27 parts2LNo license3AVR/Arduino
V0.4.4d
speeduino
100 × 100 mm141 parts2LNo license282AVR/Arduino
V0.4.4b
speeduino
100 × 100 mm138 parts2LNo license282AVR/Arduino
V0.4.3d
speeduino
100 × 100 mm127 parts2LNo license282
How designs wire the MPX4250AP
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MPX4250AP connects to, and the resistors, capacitors and other passives placed on it.
- Pin 8 is left unconnected on 3 of 3 designs.
- Pin 1 has a series resistor on 2 of 5 designs, most often 470 Ω.
- Pin 7 is tied to GND on 2 of 3 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 40% · not connected 20% · a signal 40% |
|
| Pin 7 | Connected to: GND 67% · a signal 33% | — |
| Pin 8 | Connected to: Not connected 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NA6 v1.3 by speeduino, SpeedyMAP by PyroMix62, DP1600i by Hocus-Pocus and ECU STM V1 by mstevanin4.
The MPX4250AP in open source designs
The gallery holds 12 open source boards using the MPX4250AP from 6 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 138 components.
92% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is NA6 v1.3 by speeduino.
Parts used alongside the MPX4250AP
Microcontrollers on boards using the MPX4250AP
What boards using the MPX4250AP are built for
MPX4250AP: common questions
Where can I find a MPX4250AP reference design?
Each of the 12 boards on this page is a real design using the MPX4250AP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MPX4250AP pin 8 connected?
Pin 8 is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 6 open source designs using the MPX4250AP.
What resistor goes on the MPX4250AP pin 1?
Pin 1 has a series resistor on 2 of 5 designs, most often 470 Ω. Counted from the KiCad layouts of 6 open source designs using the MPX4250AP.
How is the MPX4250AP pin 7 connected?
Pin 7 is tied to GND on 2 of 3 designs. Counted from the KiCad layouts of 6 open source designs using the MPX4250AP.
What parts are used alongside the MPX4250AP?
The LM2940S-5.0/NOPB, Pololu_Breakout_DRV8825, SP720ABTG, TC4424AVOA and Trig Cond Socket appear in the most repositories here.
Which microcontrollers do boards using the MPX4250AP use?
Most are built on AVR/Arduino (11).
How big is a typical board using the MPX4250AP?
The median is 100 × 100 mm, and 92% are two-layer designs.
What is the most popular open source board using the MPX4250AP?
By GitHub stars, NA6 v1.3 by speeduino, with 282 stars.
Can I simulate one of these boards using the MPX4250AP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.