HardLabs

Electronics

QuadFlyController·Electronics·FlightController/FlightController.kicad_pcb

Electronics PCB layout, top view — open source board by QuadFlyController

About the Electronics PCB

Electronics is an open source PCB design by QuadFlyController, published on GitHub under the MIT license. It is a 4-layer board measuring 45 × 45 mm, with 60 components from 33 distinct parts.

Other key parts include the AP2112K-3.3, USBLC6-2SC6, TPS62933 and TPS2115ADRBR. By type, the board carries 30 capacitors, 19 resistors, 4 ICs, 2 diodes, 1 crystal and 1 connector.

It belongs with the sensors, robotics & motion and power & battery designs in this gallery.

From the project

A high-performance, compact, 4-layer flight controller PCB engineered for quadcopters and small UAVs. Built around the STMicroelectronics STM32F411CEU6 MCU, featuring high-rate low-noise motion sensing, barometric altitude tracking, robust power management with dual-source automa

A high-performance, compact, 4-layer flight controller PCB engineered for quadcopters and small UAVs. Built around the STMicroelectronics STM32F411CEU6 MCU, featuring high-rate low-noise motion sensing, barometric altitude tracking, robust power management with dual-source automatic switching, and standard 30.5 mm × 30.5 mm mounting.

- Dimensions: 45.0 mm × 45.0 mm with 3.5 mm corner radius - Mounting Hole Pattern: Standard 30.5 mm × 30.5 mm, 4.3 mm holes (M4, compatible with anti-vibration silicone grommets down to M3 hardware) - Layer Stack: 4-Layer PCB - F.Cu (Top Layer): High-speed…

Main components on the Electronics

AP2112K-3.3USBLC6-2SC6TPS62933TPS2115ADRBR

Electronics bill of materials (BOM)

60 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3
U1
1
USBLC6-2SC6
U2
1
TPS62933
U6
1
TPS2115ADRBR
U7
1
25MHZ_GND24
25MHz_GND24
Y1
1
SM08B-SRSS-TBLFSN
J3
1
SMBJ18A
CR1
1
USB-TYPE-C-018
DEALON(德艺隆)
USB1
2
LED
D1, D2
1
74439346068
L1
3
C326595
10μF X7R
C1, C2, C28
1
C5199872
1μF X7R
C3
13
C1590
0.1μF X7R
C4, C7, C8, C9, C12, C13, C14, C17 +5
2
C6119822
4.7μF X7R
C5, C6
2
C5360816
14pF C0G
C10, C11
1
C43922
2.2μF X7R
C15
1
C1589
10nF X7R
C16
2
C89632
10μF X7R 50V
C19, C20
1
C1614
33nF X7R
C22
1
C1590
0.1μF X7R 16V
C23
Show 13 more
QtyPartRefs
2
C342620
22μF X5R 35V
C24, C25
1
C385964
0.1μF X7R 35V
C26
1
100kΩ
UNI-ROYAL(Uniroyal Elec)
R1
3
5.1kΩ
UNI-ROYAL(Uniroyal Elec)
R2, R3, R4
6
10kΩ
UNI-ROYAL(Uniroyal Elec)
R5, R6, R7, R8, R13, R16
1
10.2K
10.2k
R9
1
53.6K
53.6k
R10
1
10Ω
UNI-ROYAL(Uniroyal Elec)
R11
1
400
R12
1
510K
510k
R14
1
200K
200k
R15
2
1kΩ
UNI-ROYAL(Uniroyal Elec)
R17, R19
1
1.5kΩ
UNI-ROYAL(Uniroyal Elec)
R18

Electronics design files

The KiCad project lives in the QuadFlyController/Electronics repository on GitHub; these links point at the commit this page was built from.

Electronics: common questions

How big is the Electronics PCB?

The Electronics measures 45 × 45 mm, has 4 copper layers and is 1.61668 mm thick.

How many components are on the Electronics?

60 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Electronics design files?

From the QuadFlyController/Electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Electronics design in my own project?

Yes, under the terms of its MIT license, which QuadFlyController chose for the repository.

Similar boards