HardLabs

Radiante-Lite-Gen2

RadianiteComputers·RadianiteBoards·Radiante-Lite-Gen2/Radiante-Lite-Gen2.kicad_pcb

Radiante-Lite-Gen2 PCB layout, top view — open source RP2040/RP2350 board by RadianiteComputers

About the Radiante-Lite-Gen2 PCB

Radiante-Lite-Gen2 is an open source RP2040/RP2350 PCB design by RadianiteComputers, published on GitHub. It is a 2-layer board measuring 66 × 35 mm, with 58 components from 32 distinct parts.

Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, ADXL345, MIC5205-3.3YM5 and TXS0102YZP. By type, the board carries 24 capacitors, 17 resistors, 5 ICs, 5 connectors, 3 diodes and 2 switches.

From the project

A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0

2. Open the .kicadpro` file on either project you want to help in. 3. Edit, edit, edit! 4. Commit with your changes. Make sure your commit messages are concise! 5. Finally, create a pull request. A member will look after your design. There are criterias taken into account: - Legibility and form factor - Trace lengths and signal integrity (advanced computers only like Project Lemon Irvine) - Overall impedance (including RF) - Possibility for EMI or crosstalks (<1% to be accepted, almost no EMI or crosstalks)

Main components on the Radiante-Lite-Gen2

RP2350_80QFNW25Q128JVSADXL345MIC5205-3.3YM5TXS0102YZP

Radiante-Lite-Gen2 bill of materials (BOM)

58 components, 32 distinct parts.

QtyPartRefs
1
RP2350_80QFN
U1
1
W25Q128JVS
U2
1
ADXL345
U3
1
MIC5205-3.3YM5
U4
1
TXS0102YZP
U5
1
12MHz
Y1
1
USB_C_Receptacle_USB2.0_16P
J1
1
HDMI_A
J2
1
Micro_SD_Card_Det_Hirose_DM3AT
J3
1
Conn_01x03
J4
1
Conn_02x20_Odd_Even
J5
2
SW_Push
SW1, SW2
1
MBR120VLSFT1G
D1
1
BLUE
D2
1
EMERALD
D3
1
3.3u
L1
4
4.7u
C1, C2, C4, C6
14
100n
C3, C5, C7, C8, C9, C10, C11, C12 +6
2
15p
C14, C15
1
470p
C17
Show 12 more
QtyPartRefs
1
2.2u
C18
2
0.1u
C19, C20
1
33
R1
2
1k
R2, R12
2
10k
R3, R4
2
5.1k
R5, R6
2
330
R7, R13
2
100k
R8, R9
2
200
R10, R11
2
220
RN1, RN2
1
47k
RN3
1
47k
RN4

Radiante-Lite-Gen2 design files

The KiCad project lives in the RadianiteComputers/RadianiteBoards repository on GitHub; these links point at the commit this page was built from.

Radiante-Lite-Gen2: common questions

What microcontroller does the Radiante-Lite-Gen2 use?

The Radiante-Lite-Gen2 is built around the RP2350_80QFN, from the RP2040/RP2350 family.

How big is the Radiante-Lite-Gen2 PCB?

The Radiante-Lite-Gen2 measures 66 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Radiante-Lite-Gen2?

58 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Radiante-Lite-Gen2 design files?

From the RadianiteComputers/RadianiteBoards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Radiante-Lite-Gen2 design in my own project?

The repository has no license, so all rights stay with RadianiteComputers. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Radiante-Lite-Gen2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in RadianiteBoards

Similar boards