2 open source boards using the TXS0102YZP

Real designs built with the TXS0102YZP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TXS0102YZP in open source designs

The gallery holds 2 open source boards using the TXS0102YZP from 2 GitHub repositories; a typical one measures about 58 × 34 mm and carries around 51 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is CastleBox by zeankundev.

Parts used alongside the TXS0102YZP

Microcontrollers on boards using the TXS0102YZP

What boards using the TXS0102YZP are built for

TXS0102YZP: common questions

Where can I find a TXS0102YZP reference design?

Each of the 2 boards on this page is a real design using the TXS0102YZP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TXS0102YZP use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the TXS0102YZP?

The median is 58 × 34 mm, and 50% are two-layer designs.

What is the most popular open source board using the TXS0102YZP?

By GitHub stars, CastleBox by zeankundev, with 1 stars.

Can I simulate one of these boards using the TXS0102YZP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part