SwiftRocketComputer
radio-satellites·SwiftRocketComputer
About the SwiftRocketComputer PCB
SwiftRocketComputer is an open source ESP32 PCB design by radio-satellites, published on GitHub. It is a 4-layer board measuring 44.5 × 76.5 mm, with 49 components from 26 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LM317_SOT-223, ATGM336H-5N31 and E22-400M30S. By type, the board carries 18 resistors, 15 capacitors, 6 connectors, 5 ICs, 2 switches and 1 transistor.
From the project
Swift rocket computer for my L1 attempt (very WIP)
Main components on the SwiftRocketComputer
SwiftRocketComputer bill of materials (BOM)
49 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 2 | LM317_SOT-223 | SOT-223-3_TabPin2 | U2, U3 |
| 1 | ATGM336H-5N31 | GPSM-SMD_ATGM336H-TR | U5 |
| 1 | E22-400M30S | WIRELM-SMD_E22-400M30S | U7 |
| 1 | SI7232DN-T1-GE3 | TRANS_SI7232DN-T1-GE3 | Q1 |
| 2 | Screw_Terminal_01x02 | CONN-TH_2P-P5.00_WJ500V-5.08-2P | J1, J3 |
| 1 | Conn_Coaxial | HRS_U.FL-R-SMT_01_ | J2 |
| 1 | Screw_Terminal_01x04 | CONN-TH_4P-P5.08_DIBO_DB128V-5.08 | J4 |
| 1 | USB_B_Micro | AMPHENOL_10118193-0001LF | J7 |
| 1 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | J10 |
| 1 | Buzzer | BUZ-TH_BD9.0-P4.00-D0.6-FD | BZ1 |
| 2 | SW_Push | SW-SMD_4P-L6.2-W6.2-P4.50-LS8.6 | SW1, SW2 |
| 1 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1 |
| 1 | 1uF | C_0603_1608Metric | C1 |
| 3 | 10uF | C_0603_1608Metric | C2, C14, C17 |
| 10 | 100nF | C_0603_1608Metric | C3, C4, C5, C6, C7, C9, C10, C11 +2 |
| 1 | 1000uF | CP_Radial_D4.0mm_P2.00mm | C8 |
| 1 | 330 | R_0603_1608Metric | R2 |
| 4 | 1k | R_0603_1608Metric | R3, R7, R9, R14 |
| 1 | 240 | R_0603_1608Metric | R4 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 390 | R_0603_1608Metric | R5 |
| 1 | 22 | R_0603_1608Metric | R8 |
| 2 | 3.3k | R_0603_1608Metric | R10, R13 |
| 2 | 100k | R_0603_1608Metric | R11, R15 |
| 5 | 10k | R_0603_1608Metric | R12, R16, R17, R18, R19 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
SwiftRocketComputer design files
The KiCad project lives in the radio-satellites/SwiftRocketComputer repository on GitHub; these links point at the commit this page was built from.
- LayoutSwift.kicad_pcb
- SchematicSwift.kicad_sch
SwiftRocketComputer: common questions
What microcontroller does the SwiftRocketComputer use?
The SwiftRocketComputer is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the SwiftRocketComputer PCB?
The SwiftRocketComputer measures 44.5 × 76.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SwiftRocketComputer?
49 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the SwiftRocketComputer design files?
From the radio-satellites/SwiftRocketComputer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SwiftRocketComputer design in my own project?
The repository has no license, so all rights stay with radio-satellites. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SwiftRocketComputer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k