6 open source boards using the E22-400M30S

Real designs built with the E22-400M30S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the E22-400M30S

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the E22-400M30S connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_9 pin has a decoupling capacitor on 3 of 3 designs, most often 100 nF (then 10 µF).
  • The VCC_10 pin has a decoupling capacitor on 3 of 3 designs, most often 100 nF (then 10 µF).
  • The DIO2 pin is left unconnected on 3 of 3 designs.
  • The 7-TXEN pin is left unconnected on 2 of 2 designs.
GND_1pin 1Connected to: GND 100%
1-GNDpin 1-GNDConnected to: GND 100%
GND_2pin 2Connected to: GND 100%
2-GNDpin 2-GNDConnected to: GND 100%
GND_3pin 3Connected to: GND 100%
3-GNDpin 3-GNDConnected to: GND 100%
GND_4pin 4Connected to: GND 100%
4-GNDpin 4-GNDConnected to: GND 100%
GND_5pin 5Connected to: GND 100%
5-GNDpin 5-GNDConnected to: GND 100%
7-TXENpin 7-TXENConnected to: Not connected 100%
DIO2pin 8Connected to: Not connected 100%
8-DIO2pin 8-DIO2Connected to: Not connected 100%
VCC_9pin 9Connected to: 5V 67% · a signal 33%
  • Decoupling capacitor on 100% · 100 nF (4), 10 µF (2), 100 µF (1)
9-VCCpin 9-VCCConnected to: 5V 100%
VCC_10pin 10Connected to: 5V 67% · a signal 33%
  • Decoupling capacitor on 100% · 100 nF (3), 10 µF (2), 100 µF (1)
10-VCCpin 10-VCCConnected to: 5V 100%
GND_11pin 11Connected to: GND 100%
11-GNDpin 11-GNDConnected to: GND 100%
GND_12pin 12Connected to: GND 100%
12-GNDpin 12-GNDConnected to: GND 100%
GND_20pin 20Connected to: GND 100%
20-GNDpin 20-GNDConnected to: GND 100%
GND_22pin 22Connected to: GND 100%
22-GNDpin 22-GNDConnected to: GND 100%

19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FC V5e by proveskit, Esp32-lora multi gateway by enriquewph, Esp32-loradv transceiver by alonsoo-rodriguez and Stm32-lora gps tracker by usarrahim.

The E22-400M30S in open source designs

The gallery holds 6 open source boards using the E22-400M30S from 5 GitHub repositories; a typical one measures about 83.9 × 94.5 mm and carries around 65 components.

50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is FC V5e Production Rev1 by proveskit.

Microcontrollers on boards using the E22-400M30S

What boards using the E22-400M30S are built for

E22-400M30S: common questions

Where can I find a E22-400M30S reference design?

Each of the 6 boards on this page is a real design using the E22-400M30S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the E22-400M30S VCC_9 pin?

The VCC_9 pin has a decoupling capacitor on 3 of 3 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the E22-400M30S.

What decoupling capacitors do designs use on the E22-400M30S VCC_10 pin?

The VCC_10 pin has a decoupling capacitor on 3 of 3 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the E22-400M30S.

How is the E22-400M30S DIO2 pin connected?

The DIO2 pin is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the E22-400M30S.

Which microcontrollers do boards using the E22-400M30S use?

Most are built on ESP32 (3), RP2040/RP2350 (2) and STM32 (1).

How big is a typical board using the E22-400M30S?

The median is 83.9 × 94.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the E22-400M30S?

By GitHub stars, FC V5e Production Rev1 by proveskit, with 6 stars.

Can I simulate one of these boards using the E22-400M30S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part