Carte Test Tayssir
About the Carte Test Tayssir PCB
Carte Test Tayssir is an open source ESP32 PCB design by Rami-Troudi, published on GitHub. It is a 2-layer board measuring 72 × 58 mm, with 6 components from 4 distinct parts.
Its main chip is the ESP32_DevKit_V1_DOIT_30GPIOs, from the ESP32 family. Other key parts include the Pololu_Breakout_DRV8825. By type, the board carries 3 modules and 3 connectors.
From the project
Repo for my electrical work for the Eurobot competition
Main components on the Carte Test Tayssir
Carte Test Tayssir bill of materials (BOM)
6 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Pololu_Breakout_DRV8825 | Pololu_Breakout-16_15.2x20.3mm | A1, A2 |
| 1 | ESP32_DevKit_V1_DOIT_30GPIOs | DOIT_ESP32_DEVKIT_30Pins | A3 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P1.00mm_Vertical | J1, J3 |
| 1 | 1-0201FBV0T Conn_01x04 TAD | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
Carte Test Tayssir design files
The KiCad project lives in the Rami-Troudi/Electrique-Eurobot-IEEE-INSAT-2026 repository on GitHub; these links point at the commit this page was built from.
Carte Test Tayssir: common questions
What microcontroller does the Carte Test Tayssir use?
The Carte Test Tayssir is built around the ESP32_DevKit_V1_DOIT_30GPIOs, from the ESP32 family.
How big is the Carte Test Tayssir PCB?
The Carte Test Tayssir measures 72 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte Test Tayssir?
6 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte Test Tayssir design files?
From the Rami-Troudi/Electrique-Eurobot-IEEE-INSAT-2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Carte Test Tayssir design in my own project?
The repository has no license, so all rights stay with Rami-Troudi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Carte Test Tayssir without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Electrique-Eurobot-IEEE-INSAT-2026
STM32Shield stm2025
83.6 × 107.3 mm42 parts2LNo license1
ESP32Actionneurv0
90.3 × 73.9 mm40 parts2LNo license1
ESP32PAMI Stepper
120.8 × 70.1 mm31 parts2LNo license1
ESP32Pami n20 V2
80 × 65 mm30 parts2LNo license1
Carte de puissance Euro
87.1 × 81.1 mm30 parts2LNo license1
ESP32Pami n20 Chimique rev-89
86.5 × 60.9 mm18 parts2LNo license1
ESP32Pami n20 Chimique
67.4 × 50.4 mm18 parts2LNo license1
Carte Alimentation
53.8 × 36.3 mm14 parts2LNo license1
Electrovanne
39.5 × 34 mm11 parts2LNo license1
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k