Kmtouch

rapexa·kmtouch·hardware/kicad/kmtouch.kicad_pcb

Kmtouch PCB layout, top view — open source RP2040/RP2350 board by rapexa

About the Kmtouch PCB

Kmtouch is an open source RP2040/RP2350 PCB design by rapexa, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 36 mm, with 53 components from 25 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3, W25Q128JVSIQ, USBLC6-2SC6, TPS2051CDBVR and FE1.1S. By type, the board carries 21 capacitors, 15 resistors, 8 ICs, 3 connectors, 2 crystals and 2 switches.

It belongs with the keyboards and dev boards & breakouts designs in this gallery.

From the project

KMTouch: RP2040 USB mouse+keyboard to HID multi-touch adapter for Android gaming (firmware, PCB, 3D-printable case)

kmtouch is a small RP2040-based USB gadget with two USB-A ports (mouse + keyboard) and one USB-C port (to the phone). It enumerates on the phone as a standard HID multitouch touchscreen and turns key presses and mouse movement into touches at configurable screen positions — like a commercial "keymapper", but open source. The phone powers everything. No root, no ADB, no companion app.

Kmtouch, from the project README
From the project README

Main components on the Kmtouch

Kmtouch bill of materials (BOM)

53 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
AP2112K-3.3
U2
1
W25Q128JVSIQ
U3
3
USBLC6-2SC6
U4, U7, U8
1
TPS2051CDBVR
U5
1
FE1.1S
FE1.1s
U6
2
12MHZ
12MHz
Y1, Y2
1
USB4105-GF-A
J1
2
C19170946
USB-A
J2, J3
1
C70076
0.5A PTC
F1
1
C318884
BOOTSEL
SW1
1
C318884
RESET
SW2
1
C72043
green
D1
3
10UF
10uF
C1, C3, C17
13
100NF
100nF
C2, C4, C5, C6, C7, C8, C9, C10 +5
2
1UF
1uF
C11, C21
2
15PF
15pF
C14, C15
1
22UF
22uF
C20
2
5.1K
5.1k
R1, R2
2
27R
R3, R4
Show 5 more
QtyPartRefs
2
22R
R5, R6
5
10K
10k
R7, R8, R12, R14, R15
2
1k
R9, R10
1
470R
R11
1
2.7K
2.7k
R13

Kmtouch design files

The KiCad project lives in the rapexa/kmtouch repository on GitHub; these links point at the commit this page was built from.

Kmtouch: common questions

What microcontroller does the Kmtouch use?

The Kmtouch is built around the RP2040, from the RP2040/RP2350 family.

How big is the Kmtouch PCB?

The Kmtouch measures 60 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kmtouch?

53 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kmtouch design files?

From the rapexa/kmtouch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kmtouch design in my own project?

Yes, under the terms of its MIT license, which rapexa chose for the repository.

Can I test firmware for the Kmtouch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards