Smart-Viscosity-Measurement and-Control-System-VYTRON
rashadrahimzade·Smart-Viscosity-Measurement-and-Control-System-VYTRON·Electronics/Smart Viscosity Measurement and Control System.kicad_sch

About the Smart-Viscosity-Measurement and-Control-System-VYTRON PCB
Smart-Viscosity-Measurement and-Control-System-VYTRON is an open source AVR/Arduino PCB design by rashadrahimzade, published on GitHub under the Custom license license. It is a board, with 36 components from 27 distinct parts.
Its main chip is the Arduino_Nano_ESP32, from the AVR/Arduino family. Other key parts include the Arduino Mega 2560 REV3, DS18B20, MPU-6050, SSR-25DA and LJ18A3-8-Z/AX. By type, the board carries 14 ICs, 4 capacitors, 3 connectors, 2 modules, 1 jumper and 1 switch.
It belongs with the sensors, robotics & motion and test & measurement designs in this gallery.
From the project
Automated falling-ball viscometer based on Stokes' Law: Arduino Mega/Nano firmware, circuit schematics with EMI filtering, SolidWorks CAD and ANSYS analysis. TÜBİTAK 2209-A project.
VYTRON is an automated falling-ball viscometer developed as a TÜBİTAK 2209-A research project. Based on Stokes' Law, it turns the traditional manual falling-ball method into a fully automated, high-precision mechatronic system: the sample tube is rotated by a stepper motor, the ball's fall is timed, the fluid temperature is tracked, and viscosity is calculated and reported in real time.
Main components on the Smart-Viscosity-Measurement and-Control-System-VYTRON
Smart-Viscosity-Measurement and-Control-System-VYTRON bill of materials (BOM)
36 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino Mega 2560 REV3 | TQFP100 | IC3 |
| 1 | DS18B20 | TO-92_Inline | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | SSR-25DA | SOIC-8_3.81x9.347mm_P2.54mm | U3 |
| 2 | LJ18A3-8-Z/AX | Vishay_MINICAST-3Pin | U5, U7 |
| 1 | MS-600-48 SMPS | Converter_ACDC_MeanWell_IRM-60-xx_THT | U6 |
| 1 | PCF8574AP | DIP-16_W7.62mm | U8 |
| 1 | 4x20 LCD BL-WH | NHD-0420H1Z | U9 |
| 1 | JSS-860H | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U11 |
| 1 | IL9341 TFT LDC | CR2013-MI2120 | U12 |
| 2 | GAL16V8 | U13, U14 | |
| 1 | 12VDC Adaptor | Converter_ACDC_Hahn_HS-400xx_THT | U15 |
| 1 | Arduino_Nano_ESP32 | Arduino_Nano | A1 |
| 1 | Stepper_Motor_unipolar_6pin | M1 | |
| 1 | Terminal VAC | J1 | |
| 1 | VAC Safe Terminal | J2 | |
| 1 | Terminal VDC12 | J3 | |
| 3 | R | 2.2K, 4.7K, 10K | |
| 4 | 8x1F-H8.5 | 1X08 | ADCH1, ADCL1, COMMUNICATION1, PWML1 |
| 1 | Schneider 10C | CB1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8574AP | DIP-16_W7.62mm | I2C/IIC(Converter) |
| 1 | 10x1F-H8.5 | 1X10 | JP6 |
| 1 | SW_SPST_Lamp | SW1 | |
| 1 | 18x2F-H8.5 | 2X18 | XIO1 |
| 2 | 100nF | C1, C3 | |
| 2 | 104 | C2, C4 | |
| 1 | EuroWatt 200W | R1 |
Smart-Viscosity-Measurement and-Control-System-VYTRON design files
The KiCad project lives in the rashadrahimzade/Smart-Viscosity-Measurement-and-Control-System-VYTRON repository on GitHub; these links point at the commit this page was built from.
Smart-Viscosity-Measurement and-Control-System-VYTRON: common questions
What microcontroller does the Smart-Viscosity-Measurement and-Control-System-VYTRON use?
The Smart-Viscosity-Measurement and-Control-System-VYTRON is built around the Arduino_Nano_ESP32, from the AVR/Arduino family.
How many components are on the Smart-Viscosity-Measurement and-Control-System-VYTRON?
36 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart-Viscosity-Measurement and-Control-System-VYTRON design files?
From the rashadrahimzade/Smart-Viscosity-Measurement-and-Control-System-VYTRON repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart-Viscosity-Measurement and-Control-System-VYTRON design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Smart-Viscosity-Measurement and-Control-System-VYTRON without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k