HardLabs

Hyper7-Evo

ReFil·Hyper7-Evo

Hyper7-Evo PCB layout, top view — open source Nordic nRF board by ReFil

About the Hyper7-Evo PCB

Hyper7-Evo is an open source Nordic nRF PCB design by ReFil, published on GitHub. It is a 2-layer board measuring 552.5 × 164.5 mm, with 841 components from 34 distinct parts.

Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the C15999, C154937, C141606, C730243 and C15464. By type, the board carries 183 LEDs, 21 capacitors, 16 connectors, 16 resistors, 10 ICs and 3 transistors.

From the project

Hyper7-Evo

Main components on the Hyper7-Evo

C15999C154937C141606C730243MDBT50Q-1MV2C15464

Hyper7-Evo bill of materials (BOM)

841 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C15999
USBLC6-2P6
U1
1
C154937
XB3303ASOT23
U2
1
C141606
SiP32431DR3
U3
5
C730243
74HC595
U4, U7, U8, U9, U10
1
MDBT50Q-1MV2
U5
1
C15464
BQ24075RGT
U6
3
C469327
SI1308EDL-T1-GE3
Q1, Q2, Q3
1
C99009
Crystal
Y1
1
C319148
XKB-USB-C16PIN
J1
6
C395299
BM02B-SRSS-TB
J2, J9, J10, J11, J12, J13
3
CONN_01X05
Conn_01x05
J3, J6, J8
2
CONN_01X03
Conn_01x03
J4, J5
2
CONN_01X04
Conn_01x04
J14, J15
2
CONN_01X02
Conn_01x02
J16, J17
183
C25217
1k
LEDR1, LEDR2, LEDR3, LEDR4, LEDR5, LEDR6, LEDR7, LEDR8 +175
183
MX_SW_solder
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +175
39
C2890035
SK6805-EC15
RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 +31
1
C319020
SK-3296S-01-L1
S1
1
C269272
MOMENTARY-SWITCH-SPST-SMD-4.6X2.8MM
S2
183
C437156
1N4148WS
SWD1, SWD2, SWD3, SWD4, SWD5, SWD6, SWD7, SWD8 +175
Show 14 more
QtyPartRefs
183
C3646935
1206REVMNT
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +175
1
C285968
10uH
L2
7
C359190
100nF
C1, C3, C4, C6, C8, C10, C12
6
C52923
1uF
C2, C5, C7, C9, C11, C13
2
C1547
12pF
C31, C32
6
C15525
10uF
C33, C34, C35, C36, C37, C38
2
C2906885
10k
R1, R7
4
C25941
5.1k
R2, R3, R9, R10
1
C25138
100
R4
4
C2906883
100k
R5, R6, R8, R16
2
C25100
27
R11, R12
1
C25871
1.8k
R13
1
C25860
1.1k
R14
1
C2998181
590
R15

Hyper7-Evo design files

The KiCad project lives in the ReFil/Hyper7-Evo repository on GitHub; these links point at the commit this page was built from.

Hyper7-Evo: common questions

What microcontroller does the Hyper7-Evo use?

The Hyper7-Evo is built around the MDBT50Q-1MV2, from the Nordic nRF family.

How big is the Hyper7-Evo PCB?

The Hyper7-Evo measures 552.5 × 164.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hyper7-Evo?

841 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hyper7-Evo design files?

From the ReFil/Hyper7-Evo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hyper7-Evo design in my own project?

The repository has no license, so all rights stay with ReFil. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hyper7-Evo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards