5 open source boards using the C15464
Real designs built with the C15464, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Mikoto
zhiayang
18 × 33.3 mm53 parts4LApache-2.0358ESP32
Ultisense
darshg321
44.7 × 93.6 mm83 parts2LNo license3Nordic nRF
Hyper7-Evo
ReFil
552.5 × 164.5 mm841 parts2LNo license0Nordic nRF
Obscura60
HNBN9
285 × 96.5 mm158 parts2LNo license0Nordic nRF
Mikoto
yangxing844
18 × 33.3 mm55 parts4LNo license1
How designs wire the C15464
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C15464 connects to, and the resistors, capacitors and other passives placed on it.
- The TS pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
- The BAT pins have a decoupling capacitor on 5 of 5 designs, most often 4.7 µF (then 10 µF).
- The BAT pins is tied to BATT on 100% of them.
- The CE pin is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TSpin 1 | Connected to: Signal 100% |
|
| BATpin 2, 3 | Connected to: BATT 100% |
|
| CEpin 4 | Connected to: GND 100% | — |
| EN2pin 5 | Connected to: GND 80% · VDD 20% | — |
| EN1pin 6 | Connected to: VDDH 80% · GND 20% | — |
| PGOODpin 7 | Connected to: Not connected 80% · a signal 20% | — |
| VSSpin 8, 17 | Connected to: GND 100% | — |
| OUTpin 10, 11 | Connected to: VDDH 80% · a signal 20% | — |
| ILIMpin 12 | Connected to: Not connected 60% · a signal 40% |
|
| INpin 13 | Connected to: Signal 60% · VBUS 40% |
|
| TMRpin 14 | Connected to: Not connected 60% · a signal 40% |
|
| SYSOFFpin 15 | Connected to: GND 60% · a signal 40% | — |
| ISETpin 16 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mikoto by zhiayang, Ultisense by darshg321, Mikoto by yangxing844 and Obscura60 by HNBN9.
The C15464 in open source designs
The gallery holds 5 open source boards using the C15464 from 5 GitHub repositories; a typical one measures about 44.7 × 93.6 mm and carries around 83 components.
60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Mikoto by zhiayang.
Parts used alongside the C15464
Microcontrollers on boards using the C15464
What boards using the C15464 are built for
C15464: common questions
Where can I find a C15464 reference design?
Each of the 5 boards on this page is a real design using the C15464. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the C15464 TS pin?
The TS pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the C15464.
What decoupling capacitors do designs use on the C15464 BAT pin?
The BAT pins have a decoupling capacitor on 5 of 5 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the C15464.
How is the C15464 CE pin connected?
The CE pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the C15464.
What parts are used alongside the C15464?
The C15999, C1851953, C86534, ESDR0502NMUTAG and MAX17048 appear in the most repositories here.
Which microcontrollers do boards using the C15464 use?
Most are built on Nordic nRF (4) and ESP32 (1).
How big is a typical board using the C15464?
The median is 44.7 × 93.6 mm, and 60% are two-layer designs.
What is the most popular open source board using the C15464?
By GitHub stars, Mikoto by zhiayang, with 358 stars.
Can I simulate one of these boards using the C15464 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.