BitStack-DigiMind
RetroStack·BitStack-DigiMind·KiCAD/DigiMind.kicad_pcb
About the BitStack-DigiMind PCB
BitStack-DigiMind is an open source PCB design by RetroStack, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 65 mm, with 44 components from 22 distinct parts.
Other key parts include the 74LS04, 74LS161, 74LS174, 74LS85 and 74LS175. By type, the board carries 11 diodes, 9 capacitors, 9 resistors, 8 ICs, 5 switches and 1 connector.
From the project
A simple game to learn digital electronics
As part of an introduction in digital electronics workshop at VCF SW 2024, I prepared this design of a Masterm\*nd like game to teach digital electronics.
In the "Latest" folder, you'll find the most up-to-date design files, including:
- Gerber files suitable for popular online PCB manufacturers like PCBWay and JLCPCB. Most manufacturers should be fine with either. - A Bill of Materials (BOM) in both CSV and PDF formats. - The full schematics of the board.

Main components on the BitStack-DigiMind
BitStack-DigiMind bill of materials (BOM)
44 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS04 | DIP-14_W7.62mm | U1 |
| 1 | 74LS161 | DIP-16_W7.62mm | U2 |
| 1 | 74LS174 | DIP-16_W7.62mm | U3 |
| 1 | 74LS85 | DIP-16_W7.62mm | U4 |
| 1 | 74LS175 | DIP-16_W7.62mm | U5 |
| 1 | 74LS08 | DIP-14_W7.62mm | U6 |
| 1 | 74LS194 | DIP-16_W7.62mm | U7 |
| 1 | NA555P | DIP-8_W7.62mm | U10 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | 1M | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 2 | SW_DIP_X04 SW_DIP_x04 | DIP-8_W7.62mm | SW1, SW2 |
| 3 | SW_Push | SW_SPST_Push | SW3, SW4, SW5 |
| 1 | Green | LED_D5.0mm | D1 |
| 2 | Yellow | LED_D5.0mm | D2, D3 |
| 8 | Red | LED_D5.0mm | D4, D5, D6, D7, D8, D9, D10, D11 |
| 1 | 10UF 1uF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1 |
| 1 | 0.01UF 0.01uF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C2 |
| 7 | C | C_Disc_D5.1mm_W3.2mm_P5.00mm | C3, C4, C5, C6, C7, C8, C9 |
| 3 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R5, R6 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R15, R16 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R_NETWORK04 R_Network04 | R_Array_SIP5 | RN1 |
| 2 | R_NETWORK03 R_Network03 | R_Array_SIP4 | RN2, RN3 |
BitStack-DigiMind design files
The KiCad project lives in the RetroStack/BitStack-DigiMind repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCAD/DigiMind.kicad_pcb
- SchematicKiCAD/DigiMind.kicad_sch
- BOMLatest/DigiMind_BOM.csv
BitStack-DigiMind: common questions
How big is the BitStack-DigiMind PCB?
The BitStack-DigiMind measures 80 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BitStack-DigiMind?
44 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BitStack-DigiMind design files?
From the RetroStack/BitStack-DigiMind repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BitStack-DigiMind design in my own project?
Yes, under the terms of its MIT license, which RetroStack chose for the repository.