37 open source boards using the 74LS174
Real designs built with the 74LS174, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Space Odyssey
jotego
49.6 × 78.3 mm22 parts2LGPL-3.0335EPSM-Famicom
Perkka2
99 × 91.7 mm59 parts4LCustom license76Multicomp6809
nealcrook
170 × 145 mm115 parts2LNo license63CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051St251n 20603
schlae
137.4 × 199.1 mm277 parts4LNo license38Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license34ISA DualUARTParport
hkzlab
176.5 × 90.2 mm69 parts2LCC-BY-NC-4.018Gb cartridge rom mbc ram
roybaer
50 × 61 mm18 parts2LNo license16AVR/Arduino
Cbm keyboard
fachat
386.1 × 102 mm208 parts2LNo license7Betadisk clone
alvaroalea
99.7 × 149.9 mm83 parts2LNo license7VIO MPF I
electrickery
156 × 100.1 mm63 parts2LNo license4Memotron
inmbolmie
104.9 × 81.8 mm44 parts2LGPL-3.04Atari-1090XL-80CVC
reifsnyderb
228.6 × 139.7 mm78 parts2LGPL-2.03- schematic only · 278 parts
ARCADE
antongale
278 parts2LNo license3 BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT26809PC
danwerner21
244 × 244 mm155 parts2LNo license2C64NIKI2
ibaldachini
58.4 × 84.8 mm27 parts2LNo license26809 Plus EPROM Version
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause16502PC
danwerner21
244 × 244 mm154 parts2LNo license1Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1M6809-multicomputer
cartheur
170 × 145 mm111 parts2LMIT11802-Mini-1854-Serial
dmadole
100 × 100 mm44 parts2LNo license1Space Odyssey
ericlewis
49.6 × 78.3 mm22 parts2LGPL-3.01BitStack-DigiMind
RetroStack
80 × 65 mm44 parts2LMIT0EPSM-Famicom rounded
Perkka2
99 × 91.7 mm59 parts4LCustom license76St296n 20741
schlae
137.4 × 199.1 mm269 parts4LNo license38Backup
danwerner21
333.2 × 205.9 mm218 parts2LNo license34- schematic only · 26 parts
Spies-Labs-NicePrint-Card
markadev
26 parts2LNo license23 MECB IO
epaell
99.8 × 99.8 mm33 parts2LNo license6ADV-16 CPU
abzman
228.1 × 172.7 mm111 parts2LUnlicense4GIMIX 6809 CPU Plus
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1Backup1
danwerner21
333.2 × 205.9 mm218 parts2LNo license34Vfd display
eshazen
200 × 65 mm44 parts2LNo license33GIMIX DMA Floppy
roberto314
248.9 × 139.7 mm124 parts2LBSD-2-Clause1EPSM-Famicom blank
Perkka2
99 × 91.5 mm39 parts2LCustom license76
How designs wire the 74LS174
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the 74LS174 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 13 of 28 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Space Odyssey by jotego, EPSM-Famicom by Perkka2, Multicomp6809 by nealcrook and CGA Redux by hkzlab.
The 74LS174 in open source designs
The gallery holds 37 open source boards using the 74LS174 from 30 GitHub repositories; a typical one measures about 170 × 114.3 mm and carries around 95 components.
83% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.
The most starred is Space Odyssey by jotego.
Parts used alongside the 74LS174
Microcontrollers on boards using the 74LS174
What boards using the 74LS174 are built for
74LS174: common questions
Where can I find a 74LS174 reference design?
Each of the 37 boards on this page is a real design using the 74LS174. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS174 VCC pin?
The VCC pin has a decoupling capacitor on 13 of 28 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 28 open source designs using the 74LS174.
What parts are used alongside the 74LS174?
The 74LS04, 74LS74, 74LS00, 74LS86 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS174 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS174?
The median is 170 × 114.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the 74LS174?
By GitHub stars, Space Odyssey by jotego, with 335 stars.
Can I simulate one of these boards using the 74LS174 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.