17 open source boards using the 74LS85
Real designs built with the 74LS85, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
TTY
KALTCHUK
99.7 × 69.9 mm43 parts2LNo license94IBMExtender
schlae
203.2 × 105.4 mm43 parts4LNo license32Intellivision t card
abzman
143 × 174.7 mm75 parts2LUnlicense12VIO MPF I
electrickery
156 × 100.1 mm63 parts2LNo license4Atari-1090XL-80CVC
reifsnyderb
228.6 × 139.7 mm78 parts2LGPL-2.03BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT2Z80-MegaMapper
tergav17
158.8 × 91.4 mm42 parts2LNo license1TRS80 3D
palazzol
130.9 × 81.3 mm37 parts2LNo license1Lisa lisalite
warmech
103.7 × 65 mm16 parts2LNo license1Ya4b alu
lafehubert
227 × 150.1 mm133 parts2LNo license0BitStack-DigiMind
RetroStack
80 × 65 mm44 parts2LMIT0- schematic only · 27 parts
4bit-CPU
nordinMunteanu
27 partsGPL-3.00 External drive board
MEGA65
100 × 100 mm30 parts2LNo license7I2C
KALTCHUK
99.7 × 69.9 mm31 parts2LNo license94MEM
KALTCHUK
99.7 × 69.9 mm28 parts2LNo license94CPU09US4
roberto314
160 × 100 mm68 parts2LNo license1FLASHv2
KALTCHUK
99.7 × 69.9 mm16 parts2LNo license94
How designs wire the 74LS85
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the 74LS85 connects to, and the resistors, capacitors and other passives placed on it.
- The IA<B pin is tied to GND on 10 of 13 designs (5V on 2).
- The IA>B pin is tied to GND on 10 of 13 designs (5V on 2).
- The OA<B pin is left unconnected on 9 of 13 designs (a signal on 4).
- The OA>B pin is left unconnected on 8 of 13 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| B3pin 1 | Connected to: A connector 38% |
|
| IA<Bpin 2 | Connected to: GND 77% · 5V 15% | — |
| IA>Bpin 4 | Connected to: GND 77% · 5V 15% | — |
| OA>Bpin 5 | Connected to: Not connected 62% · a signal 38% | — |
| OA<Bpin 7 | Connected to: Not connected 69% · a signal 31% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| B0pin 9 | Connected to: A connector 38% |
|
| B1pin 11 | Connected to: A connector 38% |
|
| B2pin 14 | Connected to: A connector 38% |
|
| VCCpin 16 | Connected to: 5V 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FLASHv2 by KALTCHUK, IBMExtender by schlae, Intellivision t card by abzman and External drive board by MEGA65.
The 74LS85 in open source designs
The gallery holds 17 open source boards using the 74LS85 from 14 GitHub repositories; a typical one measures about 136.9 × 95.7 mm and carries around 43 components.
94% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is TTY by KALTCHUK.
Parts used alongside the 74LS85
Microcontrollers on boards using the 74LS85
What boards using the 74LS85 are built for
74LS85: common questions
Where can I find a 74LS85 reference design?
Each of the 17 boards on this page is a real design using the 74LS85. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS85 IA<B pin connected?
The IA<B pin is tied to GND on 10 of 13 designs (5V on 2). Counted from the KiCad layouts of 13 open source designs using the 74LS85.
How is the 74LS85 IA>B pin connected?
The IA>B pin is tied to GND on 10 of 13 designs (5V on 2). Counted from the KiCad layouts of 13 open source designs using the 74LS85.
How is the 74LS85 OA<B pin connected?
The OA<B pin is left unconnected on 9 of 13 designs (a signal on 4). Counted from the KiCad layouts of 13 open source designs using the 74LS85.
What parts are used alongside the 74LS85?
The 74LS04, 74LS245, 74LS00, 74LS08 and 74LS32 appear in the most repositories here.
Which microcontrollers do boards using the 74LS85 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS85?
The median is 136.9 × 95.7 mm, and 94% are two-layer designs.
What is the most popular open source board using the 74LS85?
By GitHub stars, TTY by KALTCHUK, with 94 stars.
Can I simulate one of these boards using the 74LS85 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.