ESP32 sprinkler timer
rgodin974·ESP32_sprinkler_timer·KiCAD/ESP32_Sprinkle_Timer.kicad_pcb
About the ESP32 sprinkler timer PCB
ESP32 sprinkler timer is an open source ESP32 PCB design by rgodin974, published on GitHub. It is a 2-layer board measuring 135.3 × 211.3 mm, with 99 components from 30 distinct parts.
Its main chip is the ESP32-DevKitC, from the ESP32 family. Other key parts include the PC817 and SSD1306. By type, the board carries 32 resistors, 18 diodes, 14 connectors, 10 ICs, 8 transistors and 8 relays.
From the project
Coded on PlateformIO and VS Code. Project based on RitonDuino : https://riton-duino.blogspot.com/2023/08/esp32-micro-irrigation-connectee-partie.html
Coded on PlateformIO and VS Code. Project based on RitonDuino : https://riton-duino.blogspot.com/2023/08/esp32-micro-irrigation-connectee-partie.html
Add few features : - waterings every days - waterings even days - waterings odd days - waterings custom days - seasonal adjustment - enable/disable watering(s)
Main components on the ESP32 sprinkler timer
ESP32 sprinkler timer bill of materials (BOM)
99 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | PC817 | DIP-4_W7.62mm | U1, U2, U5, U6, U7, U8, U9, U10 |
| 1 | ESP32-DevKitC | ESP32-DevKitC | U3 |
| 1 | SSD1306 | SSD1306_0.96_Oled | U4 |
| 8 | 2N3904 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | J1, J2, J3, J4, J5, J6, J7, J8 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J9, J10 |
| 1 | MOISTURE | PinHeader_1x03_P2.54mm_Horizontal | J11 |
| 1 | FLOW | PinHeader_1x03_P2.54mm_Horizontal | J12 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | VALVES | PinHeader_1x05_P2.54mm_Vertical | J14 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 8 | G2RL-1 | Relay_SPDT_Omron_G2RL-1 | K1, K2, K3, K4, K5, K6, K7, K8 |
| 1 | HLK-5M05 | Converter_ACDC_HiLink_HLK-5Mxx | PS1 |
| 1 | HLK-10M24 | Converter_ACDC_HiLink_HLK-10Mxx | PS2 |
| 2 | 10D561 | RV_Disc_D12mm_W7.5mm_P7.5mm | RV1, RV2 |
| 1 | MANUAL | SW_PUSH-12mm | SW1 |
| 1 | FUNCTION | SW_PUSH-12mm | SW2 |
| 8 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 9 | RED | LED_D3.0mm | D9, D11, D12, D13, D14, D15, D16, D17 +1 |
| 1 | GREEN | LED_D3.0mm | D10 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220uF | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 220uF | CP_Radial_D10.0mm_P5.00mm | C2 |
| 9 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 8 | 510 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R12, R13, R14, R15, R16 |
| 1 | 180 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18 |
| 3 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20, R31, R32 |
| 1 | 390 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21 |
| 1 | 18K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 8 | 2K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23, R24, R25, R26, R27, R28, R29, R30 |
ESP32 sprinkler timer design files
The KiCad project lives in the rgodin974/ESP32_sprinkler_timer repository on GitHub; these links point at the commit this page was built from.
ESP32 sprinkler timer: common questions
What microcontroller does the ESP32 sprinkler timer use?
The ESP32 sprinkler timer is built around the ESP32-DevKitC, from the ESP32 family.
How big is the ESP32 sprinkler timer PCB?
The ESP32 sprinkler timer measures 135.3 × 211.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32 sprinkler timer?
99 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 sprinkler timer design files?
From the rgodin974/ESP32_sprinkler_timer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 sprinkler timer design in my own project?
The repository has no license, so all rights stay with rgodin974. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 sprinkler timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k