AVIONICS BOARD
rgw3d·1KCubeSat_Hardware·avionics_board/AVIONICS_BOARD.kicad_pcb
About the AVIONICS BOARD
AVIONICS BOARD is an open source STM32 PCB design by rgw3d, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 85 × 85 mm, with 132 components from 58 distinct parts.
Its main chip is the STM32L496ZGTX, from the STM32 family. Other key parts include the MR25H10, TPL5010, TPS270, 74LVC1G07 and SN65HVD230. By type, the board carries 51 resistors, 37 capacitors, 12 ICs, 11 connectors, 9 diodes and 2 crystals.
It belongs with the science & space designs in this gallery.
From the project
Hardware design files for my $1000 CubeSat.
Hardware design files for my $1000 cubesat.
Schematics & Layouts are done using KiCad V5.1+
My progress so far, what I'm calling the ½ Cubesat. The avionics board is stacked on the eps board
See my fork of the OpenLST repo for more information!

Main components on the AVIONICS BOARD
AVIONICS BOARD bill of materials (BOM)
132 components, 58 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L496ZGTX STM32L496ZGTx | LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | MR25H10 | DFN-8-1EP_6x5mm_P1.27mm_EP2x2mm | U2 |
| 1 | TPL5010 | SOT-23-6 | U3 |
| 1 | TPS270 MLX75306 | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | TPS270 DRV8838 | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U5 |
| 2 | 74LVC1G07 DRV8838 | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U6, U7 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | LTC4066 MMC5983MA | LGA-16_3x3mm_P0.5mm | U9 |
| 1 | MCP65R46 BMG250 | Bosch_LGA-14_3x2.5mm_P0.5mm | U10 |
| 1 | FPF2123 74LVC1G07 | SOT-353_SC-70-5_Handsoldering | U11 |
| 1 | LTC4066 74LVC1G07 | SOT-353_SC-70-5_Handsoldering | U12 |
| 1 | TG-3541CE | Oscillator_SMD_SeikoEpson_TG3541CE-10Pin_3.2x2.5mm_HandSoldering | X1 |
| 1 | ECS-TXO-2016 | Oscillator_SMD_ECS_TXO-2016-xx-xxx-4Pin_2.0x1.6mm | X2 |
| 1 | CONN_01X04 Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | CONN_01X04 JST socket 6-pin 1mm pitch JST SH SM06B-SRSS-TB | JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J3 |
| 1 | CONN_01X02_FEMALE Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 2 | CONN_01X04 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5, J9 |
| 1 | CONN_02X20_ODD_EVEN Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | CONN_01X04 Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J10, J11 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X05 Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J12 |
| 1 | CONN_01X04_MALE Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | SW_DIP_X01 SW_DIP_x01 | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1 |
| 1 | SW_Push | SW_SPST_TL3305A | SW2 |
| 8 | Thermistor_NTC | PinHeader_1x02_P1.27mm_Vertical | TH1, TH2, TH3, TH4, TH5, TH6, TH7, TH8 |
| 1 | LED_SMD_RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED_SMD_GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 3 | LED_SMD_YELLOW | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4, D5 |
| 3 | ESD9B5.0ST5G | D_SOD-923 | D6, D7, D8 |
| 1 | NUP2105L | SOT-23 | D9 |
| 3 | 0.01UF 0.01uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C13 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C15 |
| 19 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6, C7, C8, C9, C10, C11 +11 |
| 2 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C44 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28 |
| 3 | 4.7UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C30, C33, C40 |
| 1 | 47UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32 |
| 1 | 1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34 |
| 2 | 22NF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C35, C37 |
| 1 | 4.7NF 4.7nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C39 |
| 1 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C43 |
| 1 | 1UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C45 |
| 9 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R29, R30, R31, R35, R36, R37, R38 +1 |
| 4 | 10M 10m | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R7 |
| 4 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R14, R41 |
| 7 | 100K 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R16, R17, R18, R32, R33, R42 |
| 1 | 224K DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 2 | 100K DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R12 |
| 1 | 10K DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 8.85K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 5 | 49.9 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20, R21, R22, R23 |
| 5 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R25, R26, R27, R28 |
| 2 | 150K 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34, R43 |
| 2 | 60.4 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39, R40 |
| 1 | 47K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45 |
| 5 | 100K 47K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R46, R47, R50, R51, R52 |
| 1 | 10K 47K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R48 |
| 1 | 10M 47K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R49 |
AVIONICS BOARD design files
The KiCad project lives in the rgw3d/1KCubeSat_Hardware repository on GitHub; these links point at the commit this page was built from.
AVIONICS BOARD: common questions
What microcontroller does the AVIONICS BOARD use?
The AVIONICS BOARD is built around the STM32L496ZGTX, from the STM32 family.
How big is the AVIONICS BOARD?
The AVIONICS BOARD measures 85 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the AVIONICS BOARD?
132 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AVIONICS BOARD design files?
From the rgw3d/1KCubeSat_Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the AVIONICS BOARD design in my own project?
Yes, under the terms of its GPL-3.0 license, which rgw3d chose for the repository.
Can I test firmware for the AVIONICS BOARD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in 1KCubeSat_Hardware
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k