31 open source boards using the 74LVC1G07
Real designs built with the 74LVC1G07, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
EPS
rgw3d
85 × 85 mm629 parts4LGPL-3.0157FPGA
ReAgnus
jbilander
38 × 38 mm38 parts4LCC-BY-SA-4.097Raspberry Pi
Pi CM4 16
computergeek1507
142.1 × 106 mm113 parts2LCERN-OHL-S-2.078PIC
QI Charger
drewsum
150 × 50 mm293 parts2LNo license20BaSHi-SM-1
kiu
48 × 23 mm22 parts2LCC-BY-NC-4.013FlashStick
NebraLtd
80 × 40 mm12 parts2LCC-BY-SA-4.09STM32
Eps
OSUSat
80 × 80 mm357 parts6LMIT8Moca hcho
Gekkio
66 × 57 mm18 parts2LNo license5FPGA
SDR Gen2
WA1CYB
92 × 92 mm622 parts12LMIT3ESP32
SF 01 Compute Board
sandgum
128 × 128 mm332 parts4LNo license2AP2100-power proto
imagestream
150 × 160 mm340 parts6LMIT1PS28 CORE B - SELECTED - CASE FIT UNMEASURED
bernardopg
154 × 81 mm203 parts4LNo license1Replicookie
cmcquinn
184.2 × 127 mm173 parts6LCERN-OHL-S-2.01Raspberry Pi
Thesis
Dylancyclone
158.3 × 110 mm78 parts2LNo license1FPGA
Zebra-X
Dylanfg123
90 × 60 mm423 parts10LNo license0STM32
XYmatics-E64
XyrusB2010
191.3 × 97.8 mm277 parts2LNo license0FPGA
Mainboard
jerry-kerenzikov
82 × 400 mm176 parts4LCERN-OHL-S-2.00Raspberry Pi
CM5-Carrier-Board-Rev2
AsadImranRafique
120 × 40 mm60 parts6LApache-2.00Raspberry Pi
CM5-Carrier-Board
AsadImranRafique
120 × 40 mm52 parts6LApache-2.00STM32
Sun sensor test
rgw3d
132.7 × 37.3 mm151 parts2LGPL-3.0157BaSHi-ZERO-1
kiu
48 × 23 mm22 parts2LCC-BY-NC-4.013STM32
Obc
OSUSat
80 × 80 mm144 parts4LMIT8Raspberry Pi
Cm4-printing deck
mothenjoyer69
100.4 × 92.9 mm84 parts4LMIT1PIC
GB-MBCTEST
Gekkio
51.4 × 61 mm32 parts2LCC-BY-4.0379STM32
AVIONICS BOARD
rgw3d
85 × 85 mm132 parts4LGPL-3.0157Raspberry Pi
Payload
OSUSat
80 × 80 mm55 parts4LMIT8ECE3502 PCB Design Course - Motor Driver Project
MilesMayhew
158.2 × 86 mm48 parts2LNo license1Raspberry Pi
SIL-CM4
raybello
110.9 × 143.4 mm74 parts4LNo license0AVR/Arduino
CFT DFP Board
alexiosc
233.4 × 280 mm186 parts2LGPL-3.06AVR/Arduino
Debugging Front Panel
alexiosc
280 × 164.6 mm165 parts2LGPL-3.06Light
mribble
63.5 × 33 mm17 parts2LNo license1
How designs wire the 74LVC1G07
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the 74LVC1G07 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 14 of 25 designs, most often 100 nF (then 1 µF).
- Pin 4 has a series resistor on 13 of 25 designs, most often 1 kΩ (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 96% | — |
| GNDpin 3 | Connected to: GND 96% | — |
| Pin 4 | Connected to: The microcontroller 20% |
|
| VCCpin 5 | Connected to: 3.3V 76% · a signal 24% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GB-MBCTEST by Gekkio, AVIONICS BOARD by rgw3d, ReAgnus by jbilander and Pi CM4 16 by computergeek1507.
The 74LVC1G07 in open source designs
The gallery holds 31 open source boards using the 74LVC1G07 from 25 GitHub repositories; a typical one measures about 100.4 × 81 mm and carries around 132 components.
55% use four copper layers or more, and 61% carry an open source license.
The most starred is GB-MBCTEST by Gekkio.
Parts used alongside the 74LVC1G07
Microcontrollers on boards using the 74LVC1G07
What boards using the 74LVC1G07 are built for
74LVC1G07: common questions
Where can I find a 74LVC1G07 reference design?
Each of the 31 boards on this page is a real design using the 74LVC1G07. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1G07 VCC pin?
The VCC pin has a decoupling capacitor on 14 of 25 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the 74LVC1G07.
What resistor goes on the 74LVC1G07 pin 4?
Pin 4 has a series resistor on 13 of 25 designs, most often 1 kΩ (then 330 Ω). Counted from the KiCad layouts of 25 open source designs using the 74LVC1G07.
What parts are used alongside the 74LVC1G07?
The 74LVC1G17, RT9742GGJ5, 74LVC1G06, AP3441SHE-7B and ASEK-32.768KHZ-L-R-T appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G07 use?
Most are built on Raspberry Pi (7), STM32 (6), FPGA (4) and AVR/Arduino (2).
How big is a typical board using the 74LVC1G07?
The median is 100.4 × 81 mm, and 45% are two-layer designs.
What is the most popular open source board using the 74LVC1G07?
By GitHub stars, GB-MBCTEST by Gekkio, with 379 stars.
Can I simulate one of these boards using the 74LVC1G07 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.