HardLabs

Rpi hat a500

ricardoquesada·unijoysticle2·board/rpi_hat/a500/rpi_hat_a500.kicad_pcb

Rpi hat a500 layout, top view — open source Raspberry Pi board by ricardoquesada

About the Rpi hat a500

Rpi hat a500 is an open source Raspberry Pi PCB design by ricardoquesada, published on GitHub under the SHL-2.1 license. It is a 2-layer board measuring 80.2 × 28.6 mm, with 9 components from 4 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. By type, the board carries 3 connectors, 3 diodes and 3 resistors.

It belongs with the retro computing, dev boards & breakouts and iot & wireless designs in this gallery.

From the project

Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.

A Raspeberry Pi HAT for Unijoysticle automated testing.

Board files are in this folder. Tests are in https://gitlab.com/ricardoquesada/unijoysticle2/-/tree/main/tests/functional

Rpi hat a500 bill of materials (BOM)

9 components, 4 distinct parts.

QtyPartRefs
2
DB9_Male
J1, J2
1
Raspberry_Pi_2_3
J3
3
LED
D1, D2, D3
3
1K
R1, R2, R3

Rpi hat a500 design files

The KiCad project lives in the ricardoquesada/unijoysticle2 repository on GitHub; these links point at the commit this page was built from.

Rpi hat a500: common questions

What microcontroller does the Rpi hat a500 use?

The Rpi hat a500 is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the Rpi hat a500?

The Rpi hat a500 measures 80.2 × 28.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rpi hat a500?

9 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rpi hat a500 design files?

From the ricardoquesada/unijoysticle2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rpi hat a500 design in my own project?

It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Rpi hat a500 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in unijoysticle2

Similar boards