HardLabs

Rpi hat c64

ricardoquesada·unijoysticle2·board/rpi_hat/c64/rpi_hat_c64.kicad_pcb

Rpi hat c64 layout, top view — open source Raspberry Pi board by ricardoquesada

About the Rpi hat c64

Rpi hat c64 is an open source Raspberry Pi PCB design by ricardoquesada, published on GitHub under the SHL-2.1 license. It is a 2-layer board measuring 80.2 × 33.7 mm, with 13 components from 5 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. By type, the board carries 7 resistors, 3 connectors and 3 diodes.

It belongs with the retro computing, dev boards & breakouts and iot & wireless designs in this gallery.

From the project

Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.

A Raspeberry Pi HAT for Unijoysticle automated testing.

Board files are in this folder. Tests are in https://gitlab.com/ricardoquesada/unijoysticle2/-/tree/main/tests/functional

Rpi hat c64 bill of materials (BOM)

13 components, 5 distinct parts.

QtyPartRefs
2
DB9_Male
J1, J2
1
Raspberry_Pi_2_3
J3
3
LED
D1, D2, D3
3
1K
R1, R2, R3
4
3K
R4, R5, R6, R7

Rpi hat c64 design files

The KiCad project lives in the ricardoquesada/unijoysticle2 repository on GitHub; these links point at the commit this page was built from.

Rpi hat c64: common questions

What microcontroller does the Rpi hat c64 use?

The Rpi hat c64 is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the Rpi hat c64?

The Rpi hat c64 measures 80.2 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rpi hat c64?

13 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rpi hat c64 design files?

From the ricardoquesada/unijoysticle2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rpi hat c64 design in my own project?

It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Rpi hat c64 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in unijoysticle2

Similar boards