Development board esp32
ricelectric·development-board-esp32·kicad/development_board_esp32.kicad_pcb
About the Development board esp32
Development board esp32 is an open source ESP32 PCB design by ricelectric, published on GitHub under the MIT license. It is a 2-layer board measuring 43.2 × 26.7 mm, with 28 components from 20 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MCP73831-2-OT and AP2112K-3.3. By type, the board carries 8 resistors, 7 capacitors, 4 connectors, 3 ICs, 3 diodes and 2 switches.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.
From the project
This is a powerful and compact Arduino compatible board.
This is an open source repository for a development board featuring ESP32-C3, perfect for IoT projects. More information is available here.

Main components on the Development board esp32
Development board esp32 bill of materials (BOM)
28 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | C319148 USB-C | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | CONN_01X02 Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 2 | CONN_01X09 Conn_01x09 | PinHeader_1x09_P2.54mm_Vertical | J3, J4 |
| 1 | C115357 EN | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | C115357 BOOT | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | C2286 CHG | LED_0603_1608Metric | D2 |
| 1 | C2286 RDY | LED_0603_1608Metric | D3 |
| 2 | 4.7U 4.7u | C_0402_1005Metric | C1, C4 |
| 3 | 10U 10u | C_0402_1005Metric | C2, C3, C5 |
| 2 | 0.1U 0.1u | C_0402_1005Metric | C6, C7 |
| 1 | 3.3K 3.3k | R_0402_1005Metric | R1 |
| 1 | 100K 100k | R_0402_1005Metric | R2 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R3, R4 |
| 2 | 470 | R_0402_1005Metric | R5, R6 |
| 2 | 10K 10k | R_0402_1005Metric | R7, R8 |
Development board esp32 design files
The KiCad project lives in the ricelectric/development-board-esp32 repository on GitHub; these links point at the commit this page was built from.
Development board esp32: common questions
What microcontroller does the Development board esp32 use?
The Development board esp32 is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Development board esp32?
The Development board esp32 measures 43.2 × 26.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Development board esp32?
28 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Development board esp32 design files?
From the ricelectric/development-board-esp32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Development board esp32 design in my own project?
Yes, under the terms of its MIT license, which ricelectric chose for the repository.
Can I test firmware for the Development board esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k