Bci robotics team-2-mechmania-2026
Richard-Huynh1·bci-robotics-team-2-mechmania-2026·KiCadFiles/Car/Car.kicad_sch

About the Bci robotics team-2-mechmania-2026 PCB
Bci robotics team-2-mechmania-2026 is an open source ESP32 PCB design by Richard-Huynh1, published on GitHub. It is a board, with 14 components from 9 distinct parts.
Its main chip is the ESP32-CAM, from the ESP32 family. Other key parts include the MDD3A, NRF24L01_Breakout and Arduino_Mega2560_R3_Shield. By type, the board carries 7 modules, 4 ICs and 3 battery holders.
It belongs with the robotics & motion, iot & wireless and power & battery designs in this gallery.
From the project
This repository contains all of Bluevale Collegiate Institute's Team 2 2026 MechMania files.
- Bluevale Collegiate Institute MechMania 2026 Team 2 - Description - Parts in the Controller - Parts in the Car - Technical Notes - Controller Instructions - Driving Mode - Action Mode - Bill of Materials Link - Demo Videos - Team Members
This project was made possible by having two microcontrollers: one in the controller and one in the car. Communication between the controller and the car was made using a NRF24L01 in the controller (transmitter) and another NRF24L01 in the car (receiver).
Main components on the Bci robotics team-2-mechmania-2026
Bci robotics team-2-mechmania-2026 bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MDD3A | U1, U4 | |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U2 |
| 1 | ESP32-CAM | U3 | |
| 1 | Arduino_Mega2560_R3_Shield | Arduino_Mega2560_R3_Shield | A1 |
| 4 | Motor_DC | M1, M2, M3, M4 | |
| 2 | Motor_Servo | M5, M6 | |
| 1 | 12V Battery | BT1 | |
| 1 | 9V Battery | BT2 | |
| 1 | 6V Battery | BT3 |
Bci robotics team-2-mechmania-2026 design files
The KiCad project lives in the Richard-Huynh1/bci-robotics-team-2-mechmania-2026 repository on GitHub; these links point at the commit this page was built from.
- SchematicKiCadFiles/Car/Car.kicad_sch
Bci robotics team-2-mechmania-2026: common questions
What microcontroller does the Bci robotics team-2-mechmania-2026 use?
The Bci robotics team-2-mechmania-2026 is built around the ESP32-CAM, from the ESP32 family.
How many components are on the Bci robotics team-2-mechmania-2026?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bci robotics team-2-mechmania-2026 design files?
From the Richard-Huynh1/bci-robotics-team-2-mechmania-2026 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Bci robotics team-2-mechmania-2026 design in my own project?
The repository has no license, so all rights stay with Richard-Huynh1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bci robotics team-2-mechmania-2026 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k