Microboard
Rikhav21·Microboard·PCB/Devboard.kicad_pcb
About the Microboard PCB
Microboard is an open source RP2040/RP2350 PCB design by Rikhav21, published on GitHub under the MIT license. It is a 2-layer board measuring 39.2 × 43.7 mm, with 31 components from 15 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-120xxMB and W25Q128JVS. By type, the board carries 16 capacitors, 6 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Microboard
Microboard bill of materials (BOM)
31 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | MCP1700x-120xxMB | SOT-89-3 | U2 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 3 | Conn_01x15 | PinHeader_1x15_P2.54mm_Vertical | J1, J2, J3 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Plug_Molex_105444 | P1 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 10 | 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 2 | 1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C12 |
| 2 | 10uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C13, C14 |
| 2 | 15pF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C15, C16 |
| 1 | R | R_0402_1005Metric | R1 |
| 2 | 27 | R_0402_1005Metric | R2, R3 |
| 2 | 1K | R_0402_1005Metric | R4, R6 |
| 1 | 10K | R_0402_1005Metric | R5 |
Microboard design files
The KiCad project lives in the Rikhav21/Microboard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Devboard.kicad_pcb
- SchematicPCB/Devboard.kicad_sch
- BOMBOM .csv
Microboard: common questions
What microcontroller does the Microboard use?
The Microboard is built around the RP2040, from the RP2040/RP2350 family.
How big is the Microboard PCB?
The Microboard measures 39.2 × 43.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microboard?
31 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Microboard design files?
From the Rikhav21/Microboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Microboard design in my own project?
Yes, under the terms of its MIT license, which Rikhav21 chose for the repository.
Can I test firmware for the Microboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k