9 open source boards using the MCP1700x-120xxMB
Real designs built with the MCP1700x-120xxMB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
8510C-Tang-Nano-9K-FPGA
ik2biy
51 × 127.2 mm11 parts2LGPL-3.02RP2040/RP2350
Zayalan-RP2040
sasukeop108
21 × 51 mm35 parts2LNo license1RP2040/RP2350
MedSafe
VarunAPatil
41 × 41 mm113 parts4LNo license0RP2040/RP2350
Smart watch
Paarth-Shirsat
40 × 40 mm109 parts4LNo license0RP2040/RP2350
Bramble
erikbeerepoot
72.2 × 70.7 mm82 parts2LNo license0RP2040/RP2350
Devboard
bobis1
39.3 × 51.7 mm43 parts2LNo license0RP2040/RP2350
Microboard
Rikhav21
39.2 × 43.7 mm31 parts2LMIT0- schematic only · 83 partsESP32
Stm32 devboard
mantisea12
83 partsNo license0 RP2040/RP2350
Triac driver
erikbeerepoot
96 × 90 mm42 parts2LNo license0
How designs wire the MCP1700x-120xxMB
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP1700x-120xxMB connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 10 µF).
- The VI pin has a decoupling capacitor on 5 of 7 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: VBUS 86% |
|
| VOpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8510C-Tang-Nano-9K-FPGA by ik2biy, Zayalan-RP2040 by sasukeop108, Devboard by bobis1 and Bramble by erikbeerepoot.
The MCP1700x-120xxMB in open source designs
The gallery holds 9 open source boards using the MCP1700x-120xxMB from 8 GitHub repositories; a typical one measures about 40.5 × 51.4 mm and carries around 43 components.
75% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is 8510C-Tang-Nano-9K-FPGA by ik2biy.
Parts used alongside the MCP1700x-120xxMB
Microcontrollers on boards using the MCP1700x-120xxMB
What boards using the MCP1700x-120xxMB are built for
MCP1700x-120xxMB: common questions
Where can I find a MCP1700x-120xxMB reference design?
Each of the 9 boards on this page is a real design using the MCP1700x-120xxMB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700x-120xxMB VO pin?
The VO pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the MCP1700x-120xxMB.
What decoupling capacitors do designs use on the MCP1700x-120xxMB VI pin?
The VI pin has a decoupling capacitor on 5 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP1700x-120xxMB.
What parts are used alongside the MCP1700x-120xxMB?
The W25Q128JVS, RP2040, APS6404L-3SQRx-ZR, BMP388 and CP2102N-Axx-xQFN28 appear in the most repositories here.
Which microcontrollers do boards using the MCP1700x-120xxMB use?
Most are built on RP2040/RP2350 (7) and ESP32 (1).
How big is a typical board using the MCP1700x-120xxMB?
The median is 40.5 × 51.4 mm, and 75% are two-layer designs.
What is the most popular open source board using the MCP1700x-120xxMB?
By GitHub stars, 8510C-Tang-Nano-9K-FPGA by ik2biy, with 2 stars.
Can I simulate one of these boards using the MCP1700x-120xxMB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.