Battery Charger
About the Battery Charger PCB
Battery Charger is an open source PCB design by risejohan, published on GitHub. It is a 2-layer board measuring 35.6 × 22.2 mm, with 12 components from 9 distinct parts.
Other key parts include the TP4056, AP9101C and FS8205A. By type, the board carries 5 resistors, 3 ICs, 2 diodes and 2 capacitors.
It belongs with the power & battery designs in this gallery.
From the project
In this repo we can see some designs with free use for the community, 2 Bit electronic
We have different Modules that can be used in electronic designs, implementations, prototypes and validations such as regulated sources, rtc, sd, ethernet, lora, lorawan among others, these can be applied to devices such as stm32, Arduino Uno, Mega, Esp32 , Esp8266.
For all available versions, look at the tags in this repository.
You can also look at the list of all the [contributors] (https://github.com/risejohan/2bit/contributors) who have participated in this project.
Main components on the Battery Charger
Battery Charger bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOP-8_3.76x4.96mm_P1.27mm | U1 |
| 1 | AP9101C | SOT-23-6 | U2 |
| 1 | FS8205A | TSSOP-8_4.4x3mm_P0.65mm | U3 |
| 2 | LED | LED_0805_2012Metric_Castellated | D1, D2 |
| 2 | 100nF | C_0805_2012Metric | C1, C2 |
| 2 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1.2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2.7K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Battery Charger design files
The KiCad project lives in the risejohan/2Bit repository on GitHub; these links point at the commit this page was built from.
Battery Charger: common questions
How big is the Battery Charger PCB?
The Battery Charger measures 35.6 × 22.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery Charger?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery Charger design files?
From the risejohan/2Bit repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Battery Charger design in my own project?
The repository has no license, so all rights stay with risejohan. Use it as a reference, and ask the author before reusing the design.
More boards in 2Bit
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k