Ondaire
rmalchow·ondaire·esp32/amp/amp.kicad_pcb
About the Ondaire PCB
Ondaire is an open source ESP32 PCB design by rmalchow, published on GitHub. It is a 2-layer board measuring 120 × 95 mm, with 68 components from 35 distinct parts.
Its main chip is the ESP32-S3 Super Mini, from the ESP32 family. Other key parts include the CH224K, LM2596S-5.0, AMS1117-3.3, PCM5102A and TPA3116D2. By type, the board carries 22 capacitors, 16 resistors, 7 ICs, 4 connectors, 2 diodes and 1 inductor.
It belongs with the audio and power & battery designs in this gallery.
From the project
A KiCad 10 project for a powered-speaker node: an ESP32-S3 dev board drops into a socket, an I²S DAC + class-D amp turn the stream into ~40–50 W of audio, and the whole thing runs from a single USB-C cable via USB-PD. JST plugs bring out a rotary encoder and an I²C OLED.
A KiCad 10 project for a powered-speaker node: an ESP32-S3 dev board drops into a socket, an I²S DAC + class-D amp turn the stream into ~40–50 W of audio, and the whole thing runs from a single USB-C cable via USB-PD. JST plugs bring out a rotary encoder and an I²C OLED.
This carrier is the hardware counterpart to the esp32/ firmware in this repo — the GPIO map, I²S pins and encoder pins are taken straight from esp32/boards/boardesp32s3.h, so a flashed Super Mini or Waveshare Zero works with no reconfiguration.
Main components on the Ondaire
Ondaire bill of materials (BOM)
68 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH224K | MSOP-10-1EP_3x3mm_P0.5mm_EP1.73x1.98mm | U1 |
| 1 | LM2596S-5.0 | TO-263-5_TabPin3 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | TPA3116D2 | HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias | U5 |
| 1 | ESP32-S3 Super Mini | ESP32S3_SuperMini_Socket | U6 |
| 1 | ESP32-S3 Zero | ESP32S3_Zero_Socket | U7 |
| 1 | USB-C PD in | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | SPEAKER | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | OLED I2C | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | ENCODER | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J4 |
| 2 | 470uF/35V | CP_Elec_8x10.5 | CB1, CB2 |
| 4 | 220nF | C_0805_2012Metric | CBL1, CBL2, CBR1, CBR2 |
| 1 | 1uF/63V | C_0805_2012Metric | CF1 |
| 2 | 220uF/35V | CP_Elec_8x10.5 | CI1, CP3 |
| 1 | 330uF/16V | CP_Elec_8x10.5 | CO1 |
| 1 | 100nF | C_0805_2012Metric | CP1 |
| 1 | 1nF | C_0805_2012Metric | CP2 |
| 4 | 10uH/4A | L_7.3x7.3_H4.5 | LL1, LL2, LR1, LR2 |
| 1 | SS54 | D_SMB | D1 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWR | LED_0805_2012Metric | D2 |
| 1 | 33uH/3A | L_12x12mm_H6mm | L1 |
| 7 | 1uF | C_0805_2012Metric | C1, C13, C14, C15, C16, C17, C19 |
| 11 | 100nF | C_0805_2012Metric | C2, C3, C4, C7, C8, C9, C11, C18 +3 |
| 2 | 10uF | C_0805_2012Metric | C5, C10 |
| 1 | 22uF | C_0805_2012Metric | C6 |
| 1 | 2.2uF | C_0805_2012Metric | C12 |
| 1 | DNP (NC=20V; 6.8k/24k/56k=9/12/15V) | R_0805_2012Metric | R1 |
| 8 | 10k | R_0805_2012Metric | R3, R5, R6, R7, R11, R14, R15, R16 |
| 1 | 2.2k | R_0805_2012Metric | R4 |
| 1 | 3.3 | R_0805_2012Metric | R8 |
| 1 | 5.6k | R_0805_2012Metric | R9 |
| 1 | 100k | R_0805_2012Metric | R10 |
| 2 | 4.7k | R_0805_2012Metric | R12, R13 |
| 1 | DNP (atten/downmix) | R_0805_2012Metric | R17 |
Ondaire design files
The KiCad project lives in the rmalchow/ondaire repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32/amp/amp.kicad_pcb
- Schematicesp32/amp/amp.kicad_sch
- BOMesp32/amp/bom.csv
Ondaire: common questions
What microcontroller does the Ondaire use?
The Ondaire is built around the ESP32-S3 Super Mini, from the ESP32 family.
How big is the Ondaire PCB?
The Ondaire measures 120 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ondaire?
68 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ondaire design files?
From the rmalchow/ondaire repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ondaire design in my own project?
The repository has no license, so all rights stay with rmalchow. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ondaire without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k