4 open source boards using the 74LS266

Real designs built with the 74LS266, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The 74LS266 in open source designs

The gallery holds 4 open source boards using the 74LS266 from 4 GitHub repositories; a typical one measures about 170.6 × 123.8 mm and carries around 66 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is QL QsoundQprint clone by alvaroalea.

Parts used alongside the 74LS266

74LS266: common questions

Where can I find a 74LS266 reference design?

Each of the 4 boards on this page is a real design using the 74LS266. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LS266?

The 74LS00, 74LS04, 74LS08 and 74LS244 appear in the most repositories here.

How big is a typical board using the 74LS266?

The median is 170.6 × 123.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS266?

By GitHub stars, QL QsoundQprint clone by alvaroalea, with 11 stars.

Can I simulate one of these boards using the 74LS266 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part