LCCCANCape
About the LCCCANCape PCB
LCCCANCape is an open source PCB design by RobertPHeller, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 54.6 × 98.3 mm, with 27 components from 19 distinct parts.
Other key parts include the CAT24C256W and TCAN332DR. By type, the board carries 8 resistors, 5 connectors, 4 capacitors, 3 jumpers, 2 ICs and 2 transformers.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
LCC/CAN Transceiver Cape for the Beagle Bone.
Main components on the LCCCANCape
LCCCANCape bill of materials (BOM)
27 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAT24C256W | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | TCAN332DR | SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 2 | RJ45 | RJ45_8N-S | J1, J2 |
| 1 | Console Feed Through | Pin_Header_Straight_1x06_Pitch2.54mm | J3 |
| 2 | BeagleBone_Black_Header | Socket_BeagleBone_Black | P8, P9 |
| 1 | Termination | Pin_Header_Straight_2x02_Pitch2.54mm | JMP1 |
| 1 | A0 | JP_0603_Open | JP1 |
| 1 | A1 | JP_0603_Open | JP2 |
| 1 | WP | JP_0603_Closed | JP3 |
| 1 | + 15 in - | TerminalBlock_Phoenix_MPT-2.54mm_2pol | T1 |
| 1 | + 15 out - | TerminalBlock_Phoenix_MPT-2.54mm_2pol | T2 |
| 2 | DFLS240-7 | D_PowerDI-123 | D2, D3 |
| 2 | .1 uf | C_0603 | C1, C4 |
| 1 | 15 uf 35V | CP_Elec_4x5.7 | C2 |
| 1 | 47 nf | C_0603 | C3 |
| 2 | 60 Ohms | R_1206 | R2, R3 |
| 2 | 5.6K | R_0603 | R4, R5 |
| 3 | 4.75K | R_0603 | R6, R7, R8 |
| 1 | 10K | R_0603 | R9 |
LCCCANCape design files
The KiCad project lives in the RobertPHeller/RPi-RRCircuits repository on GitHub; these links point at the commit this page was built from.
LCCCANCape: common questions
How big is the LCCCANCape PCB?
The LCCCANCape measures 54.6 × 98.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LCCCANCape?
27 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the LCCCANCape design files?
From the RobertPHeller/RPi-RRCircuits repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LCCCANCape design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which RobertPHeller chose for the repository.
More boards in RPi-RRCircuits
NXPLPC176x MultiFunction
156.2 × 168.9 mm223 parts2LCC-BY-4.024
FullInterlockingPlantCANPower
185.4 × 73.7 mm151 parts2LCC-BY-4.024
FullInterlockingPlantCAN
185.4 × 73.7 mm150 parts2LCC-BY-4.024
TivaMultiFunctionBoard
76.2 × 153.7 mm114 parts2LCC-BY-4.024
PocketBeagleMultifuntion
128.3 × 139.7 mm111 parts2LCC-BY-4.024
NXPLPC1768-MultiIOBoard
141 × 146.1 mm106 parts2LCC-BY-4.024
NXPLPC1758-MultiIOBoard
141 × 146.1 mm106 parts2LCC-BY-4.024
PocketBeaglePWMHalfSiding+ABSSlave
149.9 × 128.3 mm75 parts2LCC-BY-4.024
QuadSMC
69.9 × 101.6 mm56 parts2LCC-BY-4.024
STM32F767ZI LCC PNET Router
105.6 × 73.3 mm41 parts2LCC-BY-4.024
STM32F767ZI LCC Repeater
105.6 × 73.3 mm28 parts2LCC-BY-4.024
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979