STM32F767ZI LCC PNET Router

RobertPHeller·RPi-RRCircuits·STM32F767ZI_LCC_PNET_Router/STM32F767ZI_LCC_PNET_Router.kicad_pcb

STM32F767ZI LCC PNET Router PCB layout, top view — open source board by RobertPHeller

Simulate this board

About the STM32F767ZI LCC PNET Router PCB

STM32F767ZI LCC PNET Router is an open source PCB design by RobertPHeller, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 105.6 × 73.3 mm, with 41 components from 24 distinct parts.

Other key parts include the LM358, TCAN332DR and AP63205. By type, the board carries 10 capacitors, 8 connectors, 8 resistors, 6 diodes, 5 ICs and 3 transformers.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

This is a collection of Model Railroad open hardware and open source projects, using LCC, OpenMRN, and OpenMRN-lite, for the following MCUs and SBCs:

Raspberry Pi, generally as HATs for the "B" flavors (RPi2B, RPi3B and RPi4B). (Directories with "HAT" at the end are for these boards.)

Beagle boards, including capes for BeagleBone Black and baseboards for PocketBeagles. (Directories with "CAPE" at the end are for BeagleBone Blacks, directories starting with "BBB" are also boards for the BeagleBone Black, directories starting with "PB" or "PocketBeagle" are for the PocketBeagles - these…

Main components on the STM32F767ZI LCC PNET Router

LM358 TCAN332DR AP63205

STM32F767ZI LCC PNET Router bill of materials (BOM)

41 components, 24 distinct parts.

Qty	Part	Footprint	Refs
2	LM358	SOIC-8_3.9x4.9mm_P1.27mm	U201, U301
2	TCAN332DR	SOIC-8_3.9x4.9mm_P1.27mm	U202, U302
1	AP63205	TSOT-23-6	U401
2	ST_MORPHO	ST_Morpho	CN7, CN10
2	Termination	PinHeader_2x02_P2.54mm_Vertical	J201, J301
2	RJ45	RJ45_8N-S	J202, J203
2	PNET	95501-2661	J302, J303
1	+ LCC Power Out	TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal	T201
1	+ LCC Power In	TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal	T202
1	+ PNet Power In	TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal	T401
1	LCC Tx	LED_0603_1608Metric	D201
1	LCC Rx	LED_0603_1608Metric	D202
2	SB240	D_PowerDI-123	D203, D204
1	PNET Tx	LED_0603_1608Metric	D301
1	PNET Rx	LED_0603_1608Metric	D302
1	4.7uH	L_7.3x7.3_H4.5	L401
2	.1 uf	C_0603_1608Metric	C201, C301
2	47 nf	C_0603_1608Metric	C202, C302
2	15 uf 15V	CP_Elec_4x5.8	C203, C303
1	10uf	CP_Elec_5x5.3	C401

Show 4 more

Qty	Part	Footprint	Refs
1	100nf	C_0603_1608Metric	C402
2	22uf	C_0603_1608Metric	C403, C404
4	160 Ohms	R_0603_1608Metric	R201, R202, R301, R302
4	60 Ohms	R_1206_3216Metric	R203, R204, R303, R304

STM32F767ZI LCC PNET Router design files

The KiCad project lives in the RobertPHeller/RPi-RRCircuits repository on GitHub; these links point at the commit this page was built from.

STM32F767ZI LCC PNET Router: common questions

How big is the STM32F767ZI LCC PNET Router PCB?

The STM32F767ZI LCC PNET Router measures 105.6 × 73.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F767ZI LCC PNET Router?

41 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32F767ZI LCC PNET Router design files?

From the RobertPHeller/RPi-RRCircuits repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32F767ZI LCC PNET Router design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which RobertPHeller chose for the repository.

More boards in RPi-RRCircuits

Similar boards