FullInterlockingPlantCAN

RobertPHeller·RPi-RRCircuits·FullInterlockingPlantCAN/FullInterlockingPlantCAN.kicad_pcb

FullInterlockingPlantCAN PCB layout, top view — open source board by RobertPHeller

Simulate this board

About the FullInterlockingPlantCAN PCB

FullInterlockingPlantCAN is an open source PCB design by RobertPHeller, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 185.4 × 73.7 mm, with 150 components from 42 distinct parts.

Other key parts include the MCT6H, 74AHCT00, LM324N, MCP23017 and MCP2515. By type, the board carries 89 resistors, 15 capacitors, 12 transformers, 11 connectors, 9 transistors and 8 ICs.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

This is a collection of Model Railroad open hardware and open source projects, using LCC, OpenMRN, and OpenMRN-lite, for the following MCUs and SBCs:

Raspberry Pi, generally as HATs for the "B" flavors (RPi2B, RPi3B and RPi4B). (Directories with "HAT" at the end are for these boards.)

Beagle boards, including capes for BeagleBone Black and baseboards for PocketBeagles. (Directories with "CAPE" at the end are for BeagleBone Blacks, directories starting with "BBB" are also boards for the BeagleBone Black, directories starting with "PB" or "PocketBeagle" are for the PocketBeagles - these…

Main components on the FullInterlockingPlantCAN

MCT6H 74AHCT00 LM324N MCP23017 MCP2515 MCP2551 LM78L05ACZ

FullInterlockingPlantCAN bill of materials (BOM)

150 components, 42 distinct parts.

Qty	Part	Footprint	Refs
1	MCT6H	DIP-8__300	IC1
1	74AHCT00	DIP-14__300	U1
1	LM324N	DIP-14__300	U2
2	MCP23017	DIP-28__300	U3, U4
1	MCP2515	DIP-18__300	U5
1	MCP2551	DIP-8__300	U6
1	LM78L05ACZ	TO92	U7
1	MPQ3725A	DIP-14__300	Q1
8	MPQ2222A	DIP-14__300	Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
1	16 MHz	HC-49V	X1
1	RPI_GPIO	vasch_strip_20x2	J1
1	Termination	PIN_ARRAY_2X2	J2
2	RJ45	RJ45_8N-S	J3, J4
3	CONN_5	ScrewTerm_2.54-5	P1, P2, P3
4	CONN_1	TESTPOINT	P4, P5, P6, P7
1	Motor 1	ScrewTerm_2.54-5	T1
1	Motor 2	ScrewTerm_2.54-5	T2
1	12 to 16 Volts	ScrewTerm2.54-2	T3
2	H1	ScrewTerm_2.54-5	T4, T8
2	H2	ScrewTerm_2.54-5	T5, T9

Show 22 more

Qty	Part	Footprint	Refs
2	H3	ScrewTerm_2.54-5	T6, T10
2	H4	ScrewTerm_2.54-5	T7, T11
1	12 Volts	mors_2p	T12
1	1N5229B	D3	Z1
2	1N4002	D3	D1, D2
2	DIODESCH	D3	D3, D4
6	.1 uf	C1	C1, C3, C6, C9, C13, C14
1	1uf 35V	C1V5	C2
1	10 uf, 50V	CP_Radial_D5.0mm_P2.00mm	C4
1	15 uf, 50V	CP_Radial_D5.0mm_P2.00mm	C5
1	10 uf	C1V5	C7
2	22 pf	C1	C8, C10
1	0.33 uf	C1	C11
1	15 uf	C1V7	C12
1	47 nf	C1	C15
8	10K Ohms	R1	R1, R2, R3, R4, R40, R73, R74, R87
2	270 Ohms	R1	R5, R6
2	100 Ohms	R1	R7, R8
39	1K Ohms	R1	R9, R10, R11, R12, R13, R14, R15, R20 +31
4	470 Ohms	R1	R16, R17, R18, R19
32	150 Ohms	R1	R24, R25, R26, R27, R32, R33, R34, R35 +24
2	60 Ohms	R1	R88, R89

FullInterlockingPlantCAN design files

The KiCad project lives in the RobertPHeller/RPi-RRCircuits repository on GitHub; these links point at the commit this page was built from.

LayoutFullInterlockingPlantCAN/FullInterlockingPlantCAN.kicad_pcb

FullInterlockingPlantCAN: common questions

How big is the FullInterlockingPlantCAN PCB?

The FullInterlockingPlantCAN measures 185.4 × 73.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FullInterlockingPlantCAN?

150 components, from 42 distinct parts. The full bill of materials is listed on this page.

Where can I download the FullInterlockingPlantCAN design files?

From the RobertPHeller/RPi-RRCircuits repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the FullInterlockingPlantCAN design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which RobertPHeller chose for the repository.

More boards in RPi-RRCircuits

Similar boards